+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Bitsa or Sleeper

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    03-26-2024 @ 07:02 AM
    Location
    Cardiff Wales UK
    Posts
    472
    Real Name
    Paul Ellis
    Local Date
    03-28-2024
    Local Time
    09:26 AM

    Bitsa or Sleeper

    This recent auction purchase arrived with me "As described" being in unissued condition but with no visible serial number, anywhere. The left hand side of the action shows it as a 1915 Sht LE III and although there are Broad Arrow markings on a lot of the various pieces the barrel is obviously South African. There are BNP proof marks on the barrel but nowhere else and the witness marks would seen to indicate that it did not start life attached to this action. The whole rifle is covered in now dried very hard grease the thing that baffles me is there does not appear to be a single serial number either erased or new anywhere on the rifle. The left hand side of the butt socket appears to show a date of '27 with various inspectors marks that also appear on other metal parts across the rifle. Apart from proof testing it appears to be unfired with only storage marks on the woodwork, the pictures were taken as I stripped the rifle down, whatever it turns out to be it is still a very nice SMLE that is complete and in "As New" condition. My hunch is that it was assembled from NOS parts but a long time ago given the condition of the grease, but I wonder who painted the "3" on the butt, probably a rack number but why??
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Attached Thumbnails Click image for larger version

Name:	P1060244.jpg‎
Views:	253
Size:	280.8 KB
ID:	127930   Click image for larger version

Name:	P1060266.jpg‎
Views:	219
Size:	111.3 KB
ID:	127944   Click image for larger version

Name:	P1060264.jpg‎
Views:	215
Size:	174.8 KB
ID:	127943   Click image for larger version

Name:	P1060263.jpg‎
Views:	213
Size:	100.5 KB
ID:	127942   Click image for larger version

Name:	P1060261.jpg‎
Views:	211
Size:	163.5 KB
ID:	127941   Click image for larger version

Name:	P1060260.jpg‎
Views:	103
Size:	152.0 KB
ID:	127940   Click image for larger version

Name:	P1060258.jpg‎
Views:	119
Size:	192.6 KB
ID:	127939  

    Click image for larger version

Name:	P1060257.jpg‎
Views:	98
Size:	99.0 KB
ID:	127938   Click image for larger version

Name:	P1060256.jpg‎
Views:	101
Size:	219.4 KB
ID:	127937   Click image for larger version

Name:	P1060255.jpg‎
Views:	96
Size:	281.3 KB
ID:	127936   Click image for larger version

Name:	P1060249.jpg‎
Views:	104
Size:	210.4 KB
ID:	127935   Click image for larger version

Name:	P1060248.jpg‎
Views:	114
Size:	235.0 KB
ID:	127934   Click image for larger version

Name:	P1060247.jpg‎
Views:	105
Size:	204.6 KB
ID:	127933   Click image for larger version

Name:	P1060246.jpg‎
Views:	94
Size:	188.8 KB
ID:	127932  

    Click image for larger version

Name:	P1060245.jpg‎
Views:	106
Size:	279.4 KB
ID:	127931   Click image for larger version

Name:	P1060228.jpg‎
Views:	104
Size:	86.5 KB
ID:	127915   Click image for larger version

Name:	P1060243.jpg‎
Views:	100
Size:	142.7 KB
ID:	127929   Click image for larger version

Name:	P1060242.jpg‎
Views:	96
Size:	219.4 KB
ID:	127928   Click image for larger version

Name:	P1060241.jpg‎
Views:	90
Size:	342.2 KB
ID:	127927   Click image for larger version

Name:	P1060240.jpg‎
Views:	92
Size:	670.8 KB
ID:	127926   Click image for larger version

Name:	P1060239.jpg‎
Views:	97
Size:	279.9 KB
ID:	127925  

    Click image for larger version

Name:	P1060238.jpg‎
Views:	98
Size:	207.0 KB
ID:	127924   Click image for larger version

Name:	P1060236.jpg‎
Views:	100
Size:	252.2 KB
ID:	127923   Click image for larger version

Name:	P1060235.jpg‎
Views:	97
Size:	288.0 KB
ID:	127922   Click image for larger version

Name:	P1060234.jpg‎
Views:	90
Size:	237.9 KB
ID:	127921   Click image for larger version

Name:	P1060233.jpg‎
Views:	97
Size:	308.4 KB
ID:	127920   Click image for larger version

Name:	P1060232.jpg‎
Views:	94
Size:	446.5 KB
ID:	127919   Click image for larger version

Name:	P1060231.jpg‎
Views:	102
Size:	372.5 KB
ID:	127918  

    Click image for larger version

Name:	P1060230.jpg‎
Views:	116
Size:	412.2 KB
ID:	127917   Click image for larger version

Name:	P1060229.jpg‎
Views:	116
Size:	92.4 KB
ID:	127916  

  2. The Following 4 Members Say Thank You to Buccaneer For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    04:26 AM
    Beautiful rifle. The cocking piece was replaced as it is not correct for a 1915 rifle so I'm going with a "bitsa" but a very nice one!

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member BVZ24's Avatar
    Join Date
    Oct 2021
    Last On
    Yesterday @ 08:08 PM
    Location
    WI
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    05:26 AM
    A lot of WW1 Smle were rebuilt immediately after the war, one way or another. My '17 was rebuilt in 1920, being only 3 years old. A 1915 should have the slimmer, almost potbelly, stock most likely with volley sight evidence and definitely a magazine cut off cut. The cut off was omitted during WW1, but returned after the war.

    It looks like you have the same forestock that I do.

  7. #4
    Contributing Member smle addict's Avatar
    Join Date
    Dec 2011
    Last On
    Yesterday @ 02:48 PM
    Location
    CA, USA
    Posts
    482
    Real Name
    A. G.
    Local Date
    03-28-2024
    Local Time
    02:26 AM
    I see copious DOW marks, along with the SA and U/arrow marks. All indicating South African ownership. I know here in the states, back in the early 1990's, a batch of beautiful (like yours) SMLE III's that had been rebuilt in South Africa were imported. Lithgowicon SMLE's were going for $99, and these SA Mk III's were going for $279. I couldnt afford one, but I had the chance to put hands on one. Obviously, I couldn't pull it apart at the gun shop, but I distinctly remember the DOW marks and SA mark on the barrel knox form. This may be one of those South African batched rifles.

  8. #5
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-28-2024
    Local Time
    09:26 AM
    Yes, it is a lovely rifle, but I suspect a post service non-military assembly. I'm not convinced the body has never had a serial on it - there are traces of largely obliterated markings on the LHS of the receiver ring, just above the (recent) CIP proof mark, so it's possible a serial on the other side of the ring could have been 'lost' prior to a refinish. The rifle also has a JC/N22 No4 butt fitted. I gather No4 butts were acceptable for repurposing on SMLE's late on.............but what military armourer worth his salt would not have notched out the safety recess? And in the era when this would have occurred I very much doubt they would have bothered to modify the butt to take a stock disc. And then there are those bruises on the Knox. A number of the parts exactly as per this rifle were available in quantity some years ago via Charnwood Ordnance. Most were bought up by Terry Abrams when Charnwood packed up - these include the NOS unnumbered bolt bodies, the RSA 1950's NOS barrels, & the late production walnut Enfield woodwork. That doesn't mean that those parts were used specifically on this rifle, but it makes it a possibility.

    It's a lovely looking rifle, but I'd have to get that butt sorted! Will the safety fully engage?
    Last edited by Roger Payne; 08-18-2022 at 11:54 AM.

  9. Thank You to Roger Payne For This Useful Post:


  10. #6
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    03-26-2024 @ 07:02 AM
    Location
    Cardiff Wales UK
    Posts
    472
    Real Name
    Paul Ellis
    Local Date
    03-28-2024
    Local Time
    09:26 AM
    Thread Starter
    Hi Roger, yes the safety does engage and it does not foul the butt which is surprising so it will be staying at the moment. I agree with the Charnwood Ordnance theory for the source of the spares but I guess we shall never know who put them all together, once I have cleaned off all of the dried on grease I will pass it on, someone is going to get a very nice range rifle.

  11. #7
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-28-2024
    Local Time
    07:26 PM
    I would guess "bitsa", as well.

    Nasty marks from the wrong tool on the Knox form.

    It is what it is. Given the spiraling supply vs. demand disparity, it is a case of "get what you can" for a "starter" and keep looking.

    Is what you want is a "practical" rifle? If so, as long as the bore, bedding, headspace and bolt / safety are all to spec, and the woodwork is not too shrunken / distorted / shabby, it does not matter one whit.

    Next challenge, a goodly supply of Mk7 equivalent ball for which the rifle was set up. Non corrosive / erosive preferred.

  12. #8
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 11:01 AM
    Location
    South West Western Australia
    Posts
    7,734
    Real Name
    CINDERS
    Local Date
    03-28-2024
    Local Time
    05:26 PM
    Well they certainly put some horsepower into timing the barrel as evidenced by the bruising on both sides of the knox form edges you can clearly see the radius'ed edge flattened out.

  13. Thank You to CINDERS For This Useful Post:


  14. #9
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    02:26 AM


    Some goods ones though!
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  15. #10
    Advisory Panel Terry Hawker's Avatar
    Join Date
    Mar 2008
    Last On
    Yesterday @ 06:21 PM
    Location
    Agoura CA
    Age
    76
    Posts
    101
    Local Date
    03-28-2024
    Local Time
    02:26 AM
    Also bears a striking similarity to the bitsas made up from South African spares and flogged by Victoria Trading Company in Vermont in the early 1990's.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. A sleeper at a recent sale.
    By mjmd in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 03-12-2021, 12:23 AM
  2. Bitsa's - What to do with them?
    By jss in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 32
    Last Post: 08-14-2011, 09:24 PM
  3. Worn out No4 Mk1 bitsa - magazine platform adjustment
    By jss in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 06-17-2011, 08:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks