+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: China Burma India Patch

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 07:21 AM
    Location
    Pennsylvania, United States
    Posts
    7,006
    Real Name
    Steve
    Local Date
    04-19-2024
    Local Time
    03:13 PM

    China Burma India Patch

    Always had a bit of a soft spot for the CBI because it nearly gets ignored by almost everyone. Picked this up at an antique shop last week and have been debating what to do with it.

    It is what the call a bullion patch, made in theater, most likely in India. This is the nicest one I have seen in my research so far, possibly because it's been in this frame since shortly after the war. The photos are not the best due to it being under glass and that's part of my problem.

    The glass is "fogged" a bit, especially the top portion of the patch. There is also some dirt under the glass and the gold frame just reminds be of "old".

    But that introduces another problem. The frame and the matting are obviously old and lend to the authenticity of the patch, removing it harms it's history.

    I would like to put it in a nicer, less tacky, shadow box to better display it and keep it preserved. I'm also curious as to the construction of the back.

    Thoughts? I don't normally get into patches much, military anyway, I have a huge collection of wildlife conservation patches. I have encountered this glass fogging before with them and other things in tight frames.

    I figure I can photo document it before removing it but not sure if that's enough.

    What say the patch collectors?

    I have been able to confirm the art gallery was in business in 1947 with the same label.





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Aragorn243; 03-30-2023 at 06:23 PM.

  2. Thank You to Aragorn243 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 07:21 AM
    Location
    Pennsylvania, United States
    Posts
    7,006
    Real Name
    Steve
    Local Date
    04-19-2024
    Local Time
    03:13 PM
    Thread Starter
    I know how to get it out, the question is should I get it out.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    04-16-2024 @ 06:21 PM
    Location
    MS/USA
    Posts
    3,993
    Local Date
    04-19-2024
    Local Time
    02:13 PM
    Quote Originally Posted by Aragorn243 View Post
    I know how to get it out, the question is should I get it out.
    Tally one vote for disassemble, clean the glass and reframe and paper seal. I would try to save the gallery label and reapply to the sealing paper.
    My local Hobby Lobby does outstanding work on things like this.

  7. #4
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,691
    Local Date
    04-19-2024
    Local Time
    12:13 PM
    Leave it as it is. The old frame backing paper and label are part of the provenance and the authenticity, and that is an object very easily faked, especially where it was originally made. I'm guessing either the demand is low or they just haven't noticed it yet.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  8. The Following 2 Members Say Thank You to Surpmil For This Useful Post:


  9. #5
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 05:28 PM
    Location
    UK
    Posts
    5,106
    Local Date
    04-19-2024
    Local Time
    08:13 PM
    It may be worth looking into changing the glass in the frame to a modern alternative but still using the original frame.

  10. #6
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,691
    Local Date
    04-19-2024
    Local Time
    12:13 PM
    Quote Originally Posted by Flying10uk View Post
    It may be worth looking into changing the glass in the frame to a modern alternative but still using the original frame.
    It does need a clean, but the minute you cut that old backing off you've broken the seal so to speak.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  11. #7
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 01:41 PM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,397
    Real Name
    Daan Kemp
    Local Date
    04-19-2024
    Local Time
    09:13 PM
    The moment you change the frame, backing, etc you lose the provenance. It would only be a patch in a refurbished frame, nothing more.

  12. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 07:21 AM
    Location
    Pennsylvania, United States
    Posts
    7,006
    Real Name
    Steve
    Local Date
    04-19-2024
    Local Time
    03:13 PM
    Thread Starter
    Quote Originally Posted by Daan Kemp View Post
    The moment you change the frame, backing, etc you lose the provenance. It would only be a patch in a refurbished frame, nothing more.
    So in your opinion, what provenance is lost when you remove it from the frame? Does the frame as is establish it as an original, period piece? or something else?

    Removing it does not change the patch, it remains original. But I can see how the proof becomes less clear which is my initial concern.

    For the record, it is still in the frame. I have made no decision on it yet. I don't know if there are repro's of these out there yet or not. Probably. It's not an extremely high dollar item but enough that a profit could be made off them.

  13. #9
    Contributing Member Flying10uk's Avatar
    Join Date
    Feb 2015
    Last On
    Yesterday @ 05:28 PM
    Location
    UK
    Posts
    5,106
    Local Date
    04-19-2024
    Local Time
    08:13 PM
    Quote Originally Posted by Surpmil View Post
    It does need a clean, but the minute you cut that old backing off you've broken the seal so to speak.
    Why do you think that I suggested changing the glass for a modern alternative? For no reason?

  14. #10
    Legacy Member jond41403's Avatar
    Join Date
    Oct 2018
    Last On
    @
    Location
    Tn
    Posts
    511
    Real Name
    Jon dale
    Local Date
    04-19-2024
    Local Time
    03:13 PM
    Quote Originally Posted by Flying10uk View Post
    Why do you think that I suggested changing the glass for a modern alternative? For no reason?
    Forgive my ignorance but wouldn't changing the glass to a modern alternative require removing the back? I would leave it as is because like earlier stated, it adds provenance. It's either a decision of leaving it alone, or changing its history and provenance by replacing one or more parts of the frame.
    Last edited by jond41403; 04-13-2023 at 01:27 PM.
    "good night Chesty, Wherever You Are"

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Book: India's Enfields; The Lee-Enfield Rifle in India, 1905-2000
    By 22SqnRAE in forum WTS/WTB/WTT (Want to Sell, Buy or Trade) Forum
    Replies: 0
    Last Post: 02-20-2022, 11:27 PM
  2. Enfields for Burma?
    By greyhawk in forum Milsurps General Discussion Forum
    Replies: 0
    Last Post: 06-12-2014, 08:06 PM
  3. Burma 1944
    By SA M1Dom in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 4
    Last Post: 03-06-2014, 03:41 PM
  4. Spitfires in Burma NOT
    By RCEMERalf in forum The Watering Hole OT (Off Topic) Forum
    Replies: 12
    Last Post: 07-03-2013, 11:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts