+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: Olympic Arms A2

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member desperatedan's Avatar
    Join Date
    Apr 2011
    Last On
    Yesterday @ 07:14 PM
    Location
    Scotland
    Posts
    322
    Real Name
    Kev D.
    Local Date
    03-28-2024
    Local Time
    05:24 PM

    Olympic Arms A2

    To fill an 80's/90s period gap in my milsurp rifle collecting I've wanted an M16icon/AR15 type rifle for a while. However as here in the UKicon semi-autos are no longer allowed it's next to impossible to obtain Colt or similar 'original' rifles. There are a number of AR builders here but they tend to assemble them with slotted uppers and side handles of various flavours for ease of 'manual/straight pull' operation although there are one or two who will create A1 or A2 style replicas. However my preference has always been for something entirely US manufactured if possible.

    I was more than pleased then to recently find this uk legal Olympic Arms A2 MFR. It had a few missing or incorrect parts - a previous owner had lost all the detent balls and springs from the rear sight, the front sling swivel and it was missing the correct flash hider, all of which I've now managed to put right - but other than that it seems pretty original and lightly used. The OA heavy barrel is marked '5.56' and has a 1 in 10 twist. I've only managed a quick zeroing session so far but it looks promising and functions well using just the T-handle. One benefit of no gas system is that it stays pretty clean in use!

    I even managed to find an unissued USGI sling new in the wrap for it too, so very pleased so far.

    A few pics below.
    Attached Thumbnails Click image for larger version

Name:	IMG_8528.jpeg‎
Views:	222
Size:	334.3 KB
ID:	131267   Click image for larger version

Name:	IMG_8527.jpeg‎
Views:	197
Size:	330.9 KB
ID:	131266   Click image for larger version

Name:	IMG_8210.jpeg‎
Views:	178
Size:	528.9 KB
ID:	131265  

  2. The Following 4 Members Say Thank You to desperatedan For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:24 AM
    I had one of those about 1989/90 and that one looks about perfect. Only thing to the eye is the lack of gas tube between the slip ring and receiver as you point out...not being present. Nice looking piece.
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member desperatedan's Avatar
    Join Date
    Apr 2011
    Last On
    Yesterday @ 07:14 PM
    Location
    Scotland
    Posts
    322
    Real Name
    Kev D.
    Local Date
    03-28-2024
    Local Time
    05:24 PM
    Thread Starter
    Thanks Jim.

    Yes, chopped gas tube (stub remaining needed to hold the front handguard retaining cap of course) and no port in the barrel but otherwise all there. The serial supposedly dates it to around July/Aug '94 manufacture but Olympic appear to have added a later '97' after the MFR model designation, as well as LEO/Export only on the RH side. The Proof marks are dated '97 as well so that confirms when it came into the UKicon.
    Last edited by desperatedan; 06-03-2023 at 12:56 PM.

  7. Thank You to desperatedan For This Useful Post:


  8. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:24 AM
    Quote Originally Posted by desperatedan View Post
    dates it to around July/Aug '94
    I actually had a tour of the facility about '89 or '90 when I went to Ft Lewis WA for some sort of regimental training, probably ranges. I was in Recon Platoon and a Sgt then so at loose ends sometimes. I took a driver and jeep and went to Olympia, turned down the old Olympic highway for a couple miles...stopped in for a visit. I'd taken a copy of my local gunsmith's license so I could pick up his recent order of parts and "Stuff". We both knew I could bring back whatever I wanted in military convoy... I was in uniform and got the special treatment when I arrived. Manager Bruce Bell gave me the whole tour. What a facility...
    Regards, Jim

  9. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  10. #5
    Contributing Member BEAR's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:23 PM
    Location
    PNW
    Posts
    681
    Real Name
    Tim Rarick
    Local Date
    03-28-2024
    Local Time
    10:24 AM
    Sadly all gone now.

    BEAR

  11. Thank You to BEAR For This Useful Post:


  12. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:24 AM
    Quote Originally Posted by BEAR View Post
    all gone now
    I haven't been even near there in years. Closest I've been was driving past to Shelton ten years back. No time to go look...
    Regards, Jim

  13. #7
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    03-10-2024 @ 07:16 AM
    Location
    WV
    Posts
    173
    Local Date
    03-28-2024
    Local Time
    01:24 PM
    sweet , nice find

  14. #8
    Contributing Member frenchkat's Avatar
    Join Date
    May 2010
    Last On
    03-19-2024 @ 03:36 PM
    Location
    Cutler Bay
    Posts
    30
    Local Date
    03-28-2024
    Local Time
    01:24 PM
    Quote Originally Posted by browningautorifleicon View Post
    I actually had a tour of the facility about '89 or '90 when I went to Ft Lewis WA for some sort of regimental training, probably ranges. I was in Recon Platoon and a Sgt then so at loose ends sometimes. I took a driver and jeep and went to Olympia, turned down the old Olympic highway for a couple miles...stopped in for a visit. I'd taken a copy of my local gunsmith's license so I could pick up his recent order of parts and "Stuff". We both knew I could bring back whatever I wanted in military convoy... I was in uniform and got the special treatment when I arrived. Manager Bruce Bell gave me the whole tour. What a facility...

    I was flying AH-1s at Lewis in the early 80s. Five of us took an afternoon of (Professional Development Training) and drove down to Oly (1984). We had made advance contact, so the SWG staff knew we were coming and what we were interested in.

    We were escorted into the parts room and we each selected the parts we wanted. I went with the heavy barrel Car-15, at the time about $285 complete/unassembled. I had come to Army Aviation by way of seven years in the Airborne Infantry (82nd, 172nd) and had lots of experience with the M16icon.

    The next weekend, we had a build party, well we had a party which included building our Olys. Can't remember is any Olympia beer was associated with the Olympic Arms but we had a good time.

    None of us had any functioning issues however a friend of mine from my high school days growing up in in Tacoma, bought an assembled one and had nothing but trouble. After numerous trips back to the shop, he finally got a refund.

  15. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:24 AM
    Quote Originally Posted by frenchkat View Post
    None of us had any functioning issues however a friend of mine from my high school days growing up in in Tacoma, bought an assembled one and had nothing but trouble.
    I've heard about that too, we had a thread here on it. I had no troubles either. I think I ended up with a heavy barrel 10" CAR and had mostly Canadianicon parts except the lower. I remember the parts room two guys were working to assemble and we were just through the glass in the next room where hundreds of boxes sat waiting to fill and ship.

    I remember the AH-1s lined up by the dozen on the Gray Army airfield I think it was...we of course have never owned any.
    Regards, Jim

  16. #10
    Moderator
    (M1 Garand/M14/M1A Rifles)
    Bob Womack's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 01:07 PM
    Location
    Somewhere Between Clever and Stupid
    Posts
    3,396
    Real Name
    Bob Womack
    Local Date
    03-28-2024
    Local Time
    01:24 PM
    When my boys were young and the "Assault Weapons Ban" was on, I picked up an Olympic PCR (Politically Correct Rifle) to train them on. Still have it. It is a carbine with a A1/A2 receiver and an A1 stock. The receiver is pure A2 except for A1 sights and handle. It is missing the bayonet lug and has a muzzle brake rather than a threaded barrel to make it PC. Olympic's idea was to make it an inexpensive starter rifle, so they cast the receiver parts rather than forging them. All in all, it is a great little rifle. I've had one issue with it: the bolt's gas key broke off during a shooting session. I went back to the dealer and asked if they could order one for me. They pulled apart an AR on the wall and exchange it on the spot and I've had no further issues. It is a highly accurate rifle.

    I've been wanting to replace the cast receiver so my son recently got me an upper receiver with a rail for my birthday. Now I just have to grab a lower, some parts, and sighting system and put the thing together. I'm beginning to wonder at what point it will be a ship of Theseus!

    Bob
    "It is said, 'Go not to the elves for counsel for they will say both no and yes.' "

    Frodo Baggins to Gildor Inglorion, The Fellowship of the Ring

  17. The Following 2 Members Say Thank You to Bob Womack For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Olympic arms ar
    By johnny45 in forum M16A2/AR15A2 Rifles
    Replies: 2
    Last Post: 02-08-2018, 12:00 PM
  2. Olympic Arms
    By BEAR in forum M16A2/AR15A2 Rifles
    Replies: 32
    Last Post: 06-01-2017, 11:27 AM
  3. This Olympic Arms AR
    By drweiler in forum M16A2/AR15A2 Rifles
    Replies: 7
    Last Post: 02-06-2013, 09:45 PM
  4. What's wrong with Olympic Arms???
    By Bill Hollinger in forum M16A2/AR15A2 Rifles
    Replies: 7
    Last Post: 12-17-2009, 05:32 PM
  5. My new LOST Olympic Arms AR
    By ltcboy in forum M16A2/AR15A2 Rifles
    Replies: 11
    Last Post: 05-06-2009, 05:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks