+ Reply to Thread
Results 1 to 10 of 10

Thread: Recently acquired 1903A1 Questions

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Valkyrie45's Avatar
    Join Date
    Apr 2009
    Last On
    02-19-2011 @ 08:29 PM
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    11:56 PM

    Recently acquired 1903A1 Questions

    I just purchased a 1903 Springfield and have a couple questions. My book said the 1903A1 serial number range was approximately 1.2 to 1.5 million with a Type C stock, etc. This 03's SN is 1,505,XXX. It has a SA barrel dated 8-42. The bore is dark but has lots of rifling. Have started the cleaning process and hope it slicks up. Stock has a nice dark red color with nearly no skuff marks, etc. From the books description it is a WWII type C stock. It doesn't have any cartouches or finger grooves and feels fat in the grip. Why is the SN above the highest range in the SA book references. Did SA build several thousand extra receivers and build rifles on in to the early 40's? Any history or references on this range of high number Springfields would be appreciated,
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    74
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    04-23-2024
    Local Time
    09:56 PM
    Although is open to question by some, technically, any M1903 with a Type C stock (or a Scant, too, for that matter) was considered a M1903A1 by the Army. The highest known Springfield M1903 was in the 1,536,000 range. (Remington M1903s, M1903A3s and SC M1903A3s were numbered 3M and above) Yes, Springfield built over 200,000 extra receivers during the service life of the rifle. Most were used earlier (often to replace low numbered receivers), but some were undoubtedly assembled during early World War II.
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Today @ 12:01 AM
    Location
    Sweet Home Alabama
    Posts
    1,064
    Local Date
    04-23-2024
    Local Time
    11:56 PM

    Springfield Armory High Serial Numbers

    Quote Originally Posted by Valkyrie45 View Post
    I just purchased a 1903 Springfield and have a couple questions. My book said the 1903A1 serial number range was approximately 1.2 to 1.5 million with a Type C stock, etc. This 03's SN is 1,505,XXX. It has a SA barrel dated 8-42. The bore is dark but has lots of rifling. Have started the cleaning process and hope it slicks up. Stock has a nice dark red color with nearly no skuff marks, etc. From the books description it is a WWII type C stock. It doesn't have any cartouches or finger grooves and feels fat in the grip. Why is the SN above the highest range in the SA book references. Did SA build several thousand extra receivers and build rifles on in to the early 40's? Any history or references on this range of high number Springfields would be appreciated,
    (1) Your SA book references are in error.

    (2) No. The last SA receivers were made in the spring of 1940.

    (3) The most accurate serial number/production data are available at the following link.

    http://vishooter.home.att.net/sa_serialization.txt

    Hope this helps.

    J.B.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Loy Hamilton's Avatar
    Join Date
    Mar 2009
    Last On
    05-06-2010 @ 07:54 PM
    Location
    God's Country, Arkansas
    Posts
    138
    Local Date
    04-23-2024
    Local Time
    11:56 PM
    RTL do have the most colorful avatar.

    Weather kind of warm today in sweet home Alabama!! Had a tornado warning just a while ago in northern Madison County.

    At what point did they technically start refering to them as A1's? When the C stock started appearing?

    thanks,

    Loy

  7. #5
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    74
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    04-23-2024
    Local Time
    09:56 PM
    As I recall, the "official" adoption was made in 1929. For several more years, the only C stocks were on NM and Sales rifles.
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Valkyrie45's Avatar
    Join Date
    Apr 2009
    Last On
    02-19-2011 @ 08:29 PM
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    11:56 PM
    Thread Starter

    1903a1

    Thanks to everyone for the information. I love learning more about US Military weapons. So by the SN chart recomended to me it appears this receiver was made late in 1937. With a SA barrel dated 8-42 and what was described to me as a WWII Type C stock would this rifle be considered to have been rebuilt during WWII, sometime later than WWII or did the receiver sit in storage until being built sometime after the 42 barrel date? I realize this would be purely conjecture but since the stock has no cartouches, etc. I was thinking it was not in the main war time assembly process. Could this one be one of the ones built for Sale?

    Since the two 03 books I have, seem to be lacking in some information, what reference guide would you recommend? I have "A collector's Guide to the '03 Springfield" and "The Springfield 1903 Rifles".

    Thanks Again.
    Bruce

  9. #7
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Today @ 12:01 AM
    Location
    Sweet Home Alabama
    Posts
    1,064
    Local Date
    04-23-2024
    Local Time
    11:56 PM
    Quote Originally Posted by Valkyrie45 View Post
    Thanks to everyone for the information. I love learning more about US Military weapons. So by the SN chart recomended to me it appears this receiver was made late in 1937. With a SA barrel dated 8-42 and what was described to me as a WWII Type C stock would this rifle be considered to have been rebuilt during WWII, sometime later than WWII or did the receiver sit in storage until being built sometime after the 42 barrel date? I realize this would be purely conjecture but since the stock has no cartouches, etc. I was thinking it was not in the main war time assembly process. Could this one be one of the ones built for Sale?

    Since the two 03 books I have, seem to be lacking in some information, what reference guide would you recommend? I have "A collector's Guide to the '03 Springfield" and "The Springfield 1903 Rifles".

    Thanks Again.
    Bruce
    (1) It's possible that the S.A./8-42 barrel is original to your rifle's receiver, but not likely. Some of the very high serial number receivers (mostly above S/N 1529000) were originally fitted with 1942-dated barrels.

    (2) As I recall, the WWII-era Type C stocks inletted for the '03-A3 barrel guard ring didn't appear until 1943 or 1944. So, the stock indicates your rifle was overhauled in the latter part of WWII.

    (3) Your rifle was not originally built for private sale.

    (4) A good reference book on M1903A1 service rifles has yet to be written.

    J.B.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Don W's Avatar
    Join Date
    Mar 2009
    Last On
    08-09-2013 @ 10:41 PM
    Location
    North Central Texas
    Posts
    88
    Local Date
    04-23-2024
    Local Time
    11:56 PM
    Valkyrie45,

    The first aircraft program that I worked on was the XB-70 (Valkyrie)

    http://area51specialprojects.com/xb70story.html

    I hope the link works ~~~~~

    Don W

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Valkyrie45's Avatar
    Join Date
    Apr 2009
    Last On
    02-19-2011 @ 08:29 PM
    Posts
    14
    Local Date
    04-23-2024
    Local Time
    11:56 PM
    Thread Starter

    Valkyrie

    I am afraid the selection of my name "Valkyrie45" was not due to any experience with such an awesume plane you referred to. I chose my name building a ebay account five years ago when I owned a Honda "Valkyrie" motorcycle. At the time I was 45 years young. My wife claimed it was a midlife Crisis, and maybe it was. I rode for about a year and witnessed several riders either injured or killed and decided to enjoy my dearest hobbies, hunting, fishing and collecting military stuff instead of limping around or worse, wheel around the rest of my days.

    The Valkyrie Bike is a very powerful motorcycle. Six cylinder, six carbs, 1500 ccs of GO!

    Thanks for the help with my 1903A1.

  12. #10
    Legacy Member lonewolf's Avatar
    Join Date
    Mar 2009
    Last On
    06-03-2022 @ 02:35 PM
    Location
    New Hampshire
    Age
    76
    Posts
    61
    Local Date
    04-24-2024
    Local Time
    12:56 AM
    Should have bought a Harley....More about enjoying the ride than "fast"

+ Reply to Thread

Similar Threads

  1. Questions
    By talucah in forum The Watering Hole OT (Off Topic) Forum
    Replies: 1
    Last Post: 04-09-2009, 11:46 PM
  2. Here is the recently found RRAD rebuild...
    By ek42 in forum M1 Garand/M14/M1A Rifles
    Replies: 5
    Last Post: 04-08-2009, 09:54 AM
  3. 1903A1 NM Hatcher Hole, bolt hole question......
    By 218bee in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 4
    Last Post: 03-19-2009, 07:24 PM
  4. P&S Militaria with recently imported Garands
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 16
    Last Post: 07-18-2007, 08:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts