+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: WTK: Commercial Mauser Magnum Action, a little OT

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM

    WTK: Commercial Mauser Magnum Action, a little OT

    Sorry I know it is not milsurp,but I trust the opinion of the crowd here.Years ago I worked in a gun store and a guy was trying to trade this rifle on a Browning A5, the owner didn't want it and I eventually agreed to take it as a couple weeks pay so the guy could get his shotgun and it was pretty. So it has been in the back of my safe for years.I collect ww2 rifles, and shoot NRA highpower, I am not a hunter so it sits.
    I would guess it is from the sixties.The action is marked FN Herstal Belgiumicon Action. It is in 300 Win Mag. marked on the shoulder of the barrel, it has a Laminate stock with Rose wood tip.that is beautiful but is dated I have seen them before on vintage custom rifles I think they were popular.It has a nice trigger in it and Weaver 9 power steel scope of the same era. The gun is pretty much mint except for a little bluing wear on the muzzle face.
    I assume this is Commercial long magnum action. Is it adaptable to build a 300 Win.Mag or 338 Lapua tactical rifle I would actually use?
    Should I just sell it instead of tearing it up and buy what I want? Is this a $300 sporter or more of a $1000 dollar piece? Any guidance appreciated.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Bill H's Avatar
    Join Date
    Mar 2009
    Last On
    09-11-2009 @ 04:04 PM
    Posts
    107
    Local Date
    04-19-2024
    Local Time
    06:04 PM
    It is hard to say with just the informationn you supplied.

    The .300 Win mag can be made to fit into a standard length action, so do not assume it is a magnum action.

    Depending on the quality of the work and an eager buyer, it may be more than a $300 gun, but unless it can be attributed to some maker with a name and reputation, it is not likely a real expensive gun.

    Unfortunately, it is almost impossible to sell any run of the mill custom gun for anything like the original cost to make it.

    If you can find a copy of Ludwig Olsen's book on bolt action mausers, you may find enough information to identify the action.

    FN in Belgiumicon made many actions both before, during, and after WWII.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter
    Good point I forgot a magnum size action is not required for the 300 Win. I just assumed that anyone who wanted a non magnum action would have built it out a a mauser military rifle.. There is no builders info on it anywhere, judging by the info on the receiver it was a commercial made action and sold as a action.It was definetly not a military action rebuilt as a sporter. I would guess in the sixties or seventies.I will try to get a picture up.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Long Island's Avatar
    Join Date
    Nov 2007
    Last On
    11-16-2013 @ 04:36 PM
    Posts
    22
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    I have a 1968 Firearms International catalog that shows they imported the FN Supreme and the lower priced model Musketeer in 300 WM. Also barreled actions were available from FI in your caliber. I also remember seeing companies like Flaig's of Pa and Paul Jager selling FN actions and b/a in that caliber. I didn't think laminated stocks were too popular in the 60's except with the benchrest crowd. Sounds like a well made sporter tipical of that time frame. Don't think its a commercial magnum action but there is a Brevex Magnum Commercial Mauser action that is very similar to the FN. Jon Speed has a great book on Commercial Mauser Sporting Rifles that would help in pinning down your model.
    Bob

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter
    I'll get some pics up.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter

    Receiver pic


    Here is the receiver logo.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter

    The rest of it.


  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Bill H's Avatar
    Join Date
    Mar 2009
    Last On
    09-11-2009 @ 04:04 PM
    Posts
    107
    Local Date
    04-19-2024
    Local Time
    06:04 PM
    That is the same logo on the J.C. Higgins (sears roebuck) rifle I bought recently.

    Sears apparently had some complete rifles made by FN, and also imported actions and had the rifles built in the US. I believe Montgomery Ward, the other big mail order company did the same. Doubtless many other firms did the same.

    I bought the rifle to get the action, had a .257 Ackley built on it.

    These actions are indeed commercial Mausers, but not the same quality as the Mauserwerke actions so famous during the years between WWI and WWI. Only difference in mine was the trigger, which was changed to get rid of the two stage pull. Fortunately a standard Timney fits without modification.

    Most likely you have a nice shooter, but not collectible rifle.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter
    Thanks guys, all my planning and schemeing to rebuild or sell were ended when my other half seen it out today. That is the only pretty gun you have your not selling it are you? You better not. Yes dear.

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Curt's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2016 @ 10:29 AM
    Posts
    579
    Local Date
    04-19-2024
    Local Time
    05:04 PM
    Thread Starter
    I did not realize how much variation there was with these FN guns, I am going back to the carbine board now thanks.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. .30 Carbine vs .357 Magnum
    By Art in forum M1/M2 Carbine
    Replies: 21
    Last Post: 01-03-2013, 12:58 AM
  2. Magnum primers
    By mongo in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 09-23-2009, 09:38 PM
  3. 44 Magnum loads-Considering Gas Checks
    By garandman57 in forum Ammunition and Reloading for Old Milsurps
    Replies: 5
    Last Post: 04-17-2009, 01:19 AM
  4. Commercial M1 Carbine?
    By 1961MJS in forum M1/M2 Carbine
    Replies: 4
    Last Post: 03-29-2009, 06:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts