+ Reply to Thread
Results 1 to 5 of 5

Thread: Swedish Mauser sights

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    173rd's Avatar
    Join Date
    Mar 2009
    Last On
    12-06-2013 @ 10:36 PM
    Posts
    6
    Local Date
    04-18-2024
    Local Time
    07:30 AM

    Swedish Mauser sights

    I'm new to Swedishicon mausers. My son and I have been shooting Garands, Springfield 03A3's and M1icon carbines for about a decade. We became interested in the Swedish mausers after borrowing one to use in the Vintage rifle match at Camp Perry last year. It shot well for us so I began the search for a couple of good shooters. I recently purchased a M96 off GunBroker that is fitted with the type or model 55 rear sight rather than the standard issue ladder type rear sight. My understanding is that this type of sight was fitted to some sniper rifles and may have been used to some degree in competition. Is that correct? Also, would this type of rear sight be disqualified for use in the Vintage rifle match under CMPicon rules? It was not standard issue but was military issue as I understand it. Thanks for any information.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Art's Avatar
    Join Date
    Mar 2009
    Last On
    06-29-2009 @ 11:56 PM
    Location
    Houston Texas
    Posts
    189
    Local Date
    04-18-2024
    Local Time
    06:30 AM
    Whether it would be disqualified depends on the rules of the sanctioning organization, I would think most would approve it but that's something you'll have to check.

    It is my understanding, which may not be correct, that this was a not terribly uncommon modification. If I was going to shoot competition I would definately want the model 55 rear sight on my rifle.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member andiarisaka's Avatar
    Join Date
    Dec 2008
    Last On
    02-22-2024 @ 04:00 PM
    Location
    Upper Appalachia aka SE Ohio
    Posts
    343
    Local Date
    04-18-2024
    Local Time
    06:30 AM
    Here's link to a board with more info on Swedishicon sights: Diopters and Rear Sights - Gunboard's Forums

    I'm pretty sure the sight you've described was an issue item, and would meet the CMPicon's "as issued" rule. Diopters, are another story.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    173rd's Avatar
    Join Date
    Mar 2009
    Last On
    12-06-2013 @ 10:36 PM
    Posts
    6
    Local Date
    04-18-2024
    Local Time
    07:30 AM
    Thread Starter

    Swedish mauser sights

    Thank you both for the information.
    Regards, Don

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    metzgeri's Avatar
    Join Date
    Mar 2007
    Last On
    04-02-2014 @ 01:06 AM
    Posts
    32
    Local Date
    04-18-2024
    Local Time
    07:30 AM
    To delineate some, the m/55 was strictly for issue on the m/41b sniper rifle. Therefore, it would only be classified as "military use" on the m/41b. There are atleast three other civilian models that emulate the m/55. They are the AGJ-ram, F-ram and Pramm. These, again, are strictly civilian models and never military.

    The issue of adjustable rear sights use at CMPicon has been discussed before. I do believe it was brought before the CMP board governing such issues. I never heard a positive conclusion and guess that the CMP declined their use.

    The only adjustable rear sight that would meet the "military use" criteria would be the vasteras insert (with dial range from 300-600 or 250-600) installed on the m/38 rifles that were cut down from original m/96 rifles. The vasteras insert was a quick method to compensate for the shorter barrel and different bullet trajectory for a rifle still sporting an m/96 rear sight base. Later and as needed, the m/38 rear sight base and ladder were changed (specifically during rebarreling).

    metzgeri

+ Reply to Thread

Similar Threads

  1. 1913 Swedish mauser M96 history?
    By Norml1 in forum Mauser Rifles
    Replies: 4
    Last Post: 07-31-2008, 07:50 PM
  2. swedish mauser: a carbine?
    By terry seitz in forum Mauser Rifles
    Replies: 2
    Last Post: 01-17-2008, 07:14 AM
  3. 1896 Swedish Mauser 6.5x55mm (Mfg by Mauser Werk Oberndorf) (CGN Private Ad)
    By Badger in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 1
    Last Post: 10-03-2007, 07:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts