+ Reply to Thread
Results 1 to 5 of 5

Thread: Date of Rem Rand

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Kleanbore1's Avatar
    Join Date
    Mar 2009
    Last On
    02-06-2019 @ 12:08 PM
    Location
    north east U.S.A.
    Posts
    8
    Local Date
    04-19-2024
    Local Time
    08:59 AM

    Date of Rem Rand

    I've got an all original Remington Rand serial#1543xxx.I bought it from an estate. It was in a like new SEARS holster with no date on it. The gun still had ww2 dated ammo in the mag. The gun has about 98% original finish on it. Grandson doesn't think grandpaw shot it much if any, all though the bore does have some slight frosting in it, so it may have had a couple of those ww2 rounds fired in it and not cleaned afterwards. By the serial # what month in 1943 was this gun made? Would an S marked mag be correct for this gun? Were all SEARS holsters undated? What is a ballpark value for this rig?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    badabing's Avatar
    Join Date
    Mar 2009
    Last On
    06-12-2011 @ 05:05 PM
    Posts
    31
    Local Date
    04-19-2024
    Local Time
    07:59 AM
    1944 14711431-1609528 Remington Rand

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member cplstevennorton's Avatar
    Join Date
    Mar 2009
    Last On
    03-23-2024 @ 07:06 PM
    Location
    Van Wert, OH
    Age
    44
    Posts
    376
    Local Date
    04-19-2024
    Local Time
    08:59 AM
    It's hard to pinpoint the exact month Remingon made it. I don't think I've ever seen any exact shipping dates for Remington. I think if I remember right reading in Clawson's book that they were lost or there was a fire, or something to that effect that destroyed the records. But by your serial number I would guess the middle to later time frame in 1944.

    Anyways as far as a value, I sold one in similar condition about a year ago. I think it went for about $1600 on gunbroker. It seems right now that 1911 and A1 prices are down with the economy, and you can find some really good deals. I just bought a WWI USMC 1911 for about half of what it would have sold for last year. It just all depends on how bad someone wants it, and what they are willing to give you for it.

    S marked mags were manufactured by Scovill Mfg. Co in Waterbury Conn. and is a WWII issued mag. Most collectors like to see Remingtons with a G marked mag for General Shaver, which was a sub division of Remington Rand. It might be original, as I believe Scovill did ship mags to Remington Rand, but it's hard telling. When you think of how many magazines were made for WWII, and the GI's didn't care if they kept the original one or not. And most Gi's were issued at least three magazines with a pistol. I highly doubt many issued pistols out there have their original mag their were shipped with. Just my opinion.

    As far as the holster I've seen both Sears dated and un-dated. Why the difference someone else will have to explain to you as that is out of my field of experience.

    Nice find.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    04-19-2024
    Local Time
    07:59 AM
    There have probably been more than a few original Little, Risdon, or Scovill magazines taken out of Remington Rand pistols and replaced with General Shaver magazines. I would leave the Scovill magazine in the pistol, just like it was when you purchased it. If it had a lanyard loop or plain base two tone, you would know it wasn't correct, but the Scovill stands just a good, if not better, chance of being original to the pistol than a General Shaver.
    If you would care to post the serial number I can give you a very good idea of what month the Remington Rand was made.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Kleanbore1's Avatar
    Join Date
    Mar 2009
    Last On
    02-06-2019 @ 12:08 PM
    Location
    north east U.S.A.
    Posts
    8
    Local Date
    04-19-2024
    Local Time
    08:59 AM
    Thread Starter
    Hi Johnny Peppers
    The serial # of my Rem-Rand is 15431xx. The slide on this gun has a very slight color difference on the front 1 1/2 inches. I assume this is from a heat treating of the recoil lug area of the slide, am I correct and is this an indication of original finish? Thanks

+ Reply to Thread

Similar Threads

  1. Remington Rand Parts
    By mike webb in forum 1911/1911A1 Service Pistol
    Replies: 2
    Last Post: 05-24-2009, 08:49 AM
  2. Thoughts on this Remington Rand
    By Finestkind in forum 1911/1911A1 Service Pistol
    Replies: 5
    Last Post: 05-05-2009, 10:30 PM
  3. remington rand 1911A1
    By RoninPhoenix in forum 1911/1911A1 Service Pistol
    Replies: 1
    Last Post: 03-31-2009, 09:36 PM
  4. My Remington Rand 1911A1
    By m1crazy in forum 1911/1911A1 Service Pistol
    Replies: 2
    Last Post: 03-31-2009, 05:07 PM
  5. A nice Remington Rand...
    By John Holbrook in forum 1911/1911A1 Service Pistol
    Replies: 9
    Last Post: 03-21-2009, 07:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts