What is the best way to load a32 acp chamber insert in a MKIII? I don't want to break an ejector.
Printable View
What is the best way to load a32 acp chamber insert in a MKIII? I don't want to break an ejector.
Exactly the same as e would insert a CHS gauge if you didn't want to snap a bit off the rim. Slide the sub cal carrier up UNDER the face of the bolt head and UNDER the extractor. Then slip it in.
I suppose as it's a low power cartridge you could just use an extractor-less slave bolthead for firing the sub-cal rounds off.......
Thanks for the help. Better not to break things.
I just drop mine in & close the bolt !....................
Biggest killer of No4 and No1 extractor springs. Single shot feeding a round into the breech.
if you are going to use it long term remove the extractor. I make my inserts with a screwdriver slot at the rim of the sub chamber so a small screwdriver can be used for extraction of the fired case. this way the insert can stay in the chamber. its also quicker and easier to use
here is some pictures of my 45acp to 577/450 adapter showing the screwdriver extractor method
https://www.milsurps.com/images/impo...viu976wo-1.jpg
https://www.milsurps.com/images/impo...98kbfrrd-1.jpg
https://www.milsurps.com/images/impo...bqdp0yrw-1.jpg
Is that an adaptor you purchased commercially, or one you made yourself? Either way it looks very handy!