Marking Restoration Work!

Marking Restoration Work!

I’ve made a plan and started today using a new mark “MP” in an oval. Both these rifles were Stock-up major restorations. For rifles without a trapdoor butt I plan to mark them under the barrel just in front of the forend like a barrel weight number on a high-wall unless someone has a better idea.

https://www.milsurps.com/images/impo.../06/WR12-1.jpg
https://www.milsurps.com/images/impo...C_000411-1.jpg

https://www.milsurps.com/images/impo.../04/FAR6-1.jpg https://www.milsurps.com/images/impo...C_000511-1.jpg

Michael,

I fully endorse the idea of "Marking" your work and "your mark" looks great.

I, however, would propose that you mark the rifle itself and in the same location for all. My thoughts are to mark the side (Left side?) of the barrel somewhere (2.0"?) in front of the receiver and just below the wood line.

Mark all rifles <> same location.

Marking only a butt plate might confuse later generations into thinking it was a "MP" butt plate.

My thoughts, Don W :cheers: <> ???

https://www.milsurps.com/images/impo.../ry3D400-1.jpg

Let me make it clear that I did not do the work on this rifle, it’s beyond my ability. This rifle had a scope mounted on it, the bolt was bent, then the stock cut out for it and the receiver was cut out as well.


https://www.milsurps.com/images/impo.../restore-1.jpg