K98 cleaning rod length

I have 2 K98 cleaning rods (repro), but they are of different lengths. What would the proper length be?

Thanks in advance.

LI

12.5 inches would be normal length. But I do believe the very early ones were 10 inch, maybe someone can clarify this.

I believe you're right Sigismund.

According to Backbone of the Wehrmacht, the change to the longer cleaning rod was announced in the March 10, 1939 edition of Heeres Verordnungsblatt.

To tell what length cleaning rod a stock uses, look for the nut that the rod screws into. The shorter 250 mm cleaning rod screws into a nut set into the stock at the level of the lower band, and it is visible on the outside of the stock after the lower band is removed. The longer 320 mm cleaning rod screws into a nut set into the stock farther back, and it is visible on the inside of the stock.

https://www.milsurps.com/images/impo.../82vjznc-1.jpg

Quote:

---

Originally Posted by Milsurp Collector

According to Backbone of the Wehrmacht, the change to the longer cleaning rod was announced in the March 10, 1939 edition of Heeres Verordnungsblatt.

To tell what length cleaning rod a stock uses, look for the nut that the rod screws into. The shorter 250 mm cleaning rod screws into a nut set into the stock at the level of the lower band, and it is visible on the outside of the stock after the lower band is removed. The longer 320 mm cleaning rod screws into a nut set into the stock farther back, and it is visible on the inside of the stock.

https://www.milsurps.com/images/impo.../82vjznc-1.jpg

---

I didnt know that. Thanks for the info, much apreciated.

Thanks for the info!!!!