Hallo,
i'm trying to define a "accuracy load" for my new toy ( a nice 89/29 Brno
persian mauser ) i would like to utilize in some nat. match
till now i made some test with the classic loads :
IMR4064/4895 - 43,6 - Sellier&Bellot 196 gr FMJ - OAL 3.157 - CCI BR2
Vitha N150 - 45,8 / 46,5 - Sellier&Bellot 196 gr FMJ - OAL 3.157 - CCI BR2
( Fed 210 GM Match should be better but ....recently very difficult to find )
( Sierra MK 200 HPBT also work just barely better then the ...cheaper S&B )
.....and the result was honest with groups of 1,5"/ 2" about at 100 yds ( open sight )
Well , to continue the search , and try to improve the performance i would like test
the W748 ( i could have it available from a friend ) ....but i have some doubt
about it because the burning rate of this powder against the weights ( 196/200 gr )
of the bullets i have ( despite the H.co. tables say it could work ):confused:
any of you have some experience about this "bullet weight/powder mix" ?
Thank you in advance for opinions and/or experiences from you
regards
CC