1955 SA M1 Garand drawing numbers

Hi, wondering if I could get some help finding out if this Garand is correct based on drawing numbers? The rifle is 1955 Springfield Armory serial 5,4xx,xxx

Reciever: F 6528291
Barrel: SA F6535448 2 55 A218B
Bolt: D28287-12SA
Trigger group: 6528290-SA
Op rod: 779072

Thank you!

You can look here and get an idea

USRifleCAL30M1.com


SA Bolt 6528287-SA A16 January/1955 to December/1957 5900000 - 5999000

I would expect all parts for 1955 would have the 65 prefix code - So no, not correct on the 12 SA Bolt

Springfield Armory

1952 – 1954 sn#4,200,001 to 4,399,999

Aug. 1952 sn#5,000,000 to 5,000,500

1954 – 1955 sn#5,278,246 to 5,488,246
1955 – 1957 sn#5,793,848 to 6,099,905

Thanks!

Quote:

---

Originally Posted by MadMechaNick

if this Garand is correct based on drawing numbers

---

In Canada, the odds of finding an original assembled M1 are very scarce. Only some of the lend lease rifles that came in will be correct. Alan Lever of Lever Arms in Vancouver imported many Danish returns over the years. I was told clearly by men that worked for him that the rifles were all stripped to bits and reassembled...after parts were inspected. Some older members will remember JohnR now passed on, he was one of the inspectors working on these rifles in Vancouver.

Quote:

---

Originally Posted by browningautorifle

the rifles were all stripped to bits and reassembled.

---

CMP was smart enough to ask GCA for help in identifying what collectors wanted or they might have done the same thing. We were thrilled to be asked.

I'm not sure what these guys were doing exactly, serviceability check I think it was supposed to be.

They all have a liability risk, so they don't want to take any chances.

Quote:

---

Originally Posted by browningautorifle

In Canada, the odds of finding an original assembled M1 are very scarce. Only some of the lend lease rifles that came in will be correct. Alan Lever of Lever Arms in Vancouver imported many Danish returns over the years. I was told clearly by men that worked for him that the rifles were all stripped to bits and reassembled...after parts were inspected. Some older members will remember JohnR now passed on, he was one of the inspectors working on these rifles in Vancouver.

---

I read that the Danish Garands were shipped to the CMP without their bolts. Is there any truth to this statement? Or was what I read actually referring to the Danish rifles shipped to Canada, similar to how you mentioned that they were shipped in bits and pieces?

Quote:

---

Originally Posted by Ms15710

you mentioned that they were shipped in bits and pieces?

---

No, I said they were STRIPPED into every single part and all stripped parts checked for serviceability. I wouldn't doubt the bolt removal story though. If you observe the rear sight cover has a number and an anchor engraved...I've never seen one that matches the rifle number. The stock number also is likely mismatched.