M1 Carbine Stripper Clips

A little photo sharing of a recent ebay find, 10 clips with spoons to help round out my M1C EIS

The price was about $2 each plus a little for shipping, which is less than I would have to pay for Mosin or Lee Enfield locally, so not bad.

They are in decent shape too.

https://www.milsurps.com/images/impo...7a62d57c-1.jpg

https://www.milsurps.com/images/impo...6f007da0-1.jpg

https://www.milsurps.com/images/impo...fe2c213c-1.jpg

Unfortunately, due to federal regulations this is as far as they will feed, but better than fumbling with cold hands during winter shoots.

https://www.milsurps.com/images/impo...189c3fb2-1.jpg

https://www.milsurps.com/images/impo...6738e2fa-1.jpg

I've had and used them myself. The only drawback is when the little tab breaks off the end and they don't want to retain ten rounds. The bottom one goes stray...

Am I correct that the rivets I see in your mags are meant to limit each mag's capacity to comply with your country's laws? If that's so, are simple rivets enough to be in compliance?

I ask this because I routinely remove rivets when needed, using just a drill and a few seconds work - so it looks like each mag could be brought back to full capacity with a moment's work...

Quote:

---

Originally Posted by lemaymiami

Am I correct that the rivets I see in your mags are meant to limit each mag's capacity to comply with your country's laws? If that's so, are simple rivets enough to be in compliance?

---

You are correct, that is the purpose of the rivet, and is probably the most common form of altering a magazine to make it legally compliant in Canada. Also acceptable is the use of epoxy, as well as "pinching" the magazine body, or through the use of "tall" followers etc.

In basic form a semi-auto centerfire rifle must be limited to 5 rounds, while a manually operated rifle is unlimited capacity. Handguns are limited to 10 rounds regardless of rim or centerfire. There are exemptions like Luger snail drums, and M1 Garands but that is the gist of it.

Removing items such as pins is prohibited under law, with severe consequences, however disassembly for cleaning or repair has never really been addressed legally. Venturing any further along this discussion will likely have the thread locked, but the above should satisfy your curiosity.

Quote:

---

Originally Posted by browningautorifle

I've had and used them myself. The only drawback is when the little tab breaks off the end and they don't want to retain ten rounds. The bottom one goes stray...

---

I did notice those little tabs, and figured that brass will work harden and break away eventually. Shame it isn't a little piece of spring steel like the Warsaw pact stuff is clipped up with. I am sure the original design never had anyone dreaming that stripper clips would be reused beyond their one use service life. I will see how many it takes to snap them off I suppose.

I typically get about 3 uses out of mine, depending on how good the brass is. I've never seen refills for sale, probably because the complete things are so cheap. Too bad, as they are handy, great for storage, and work very well. I also like how these have the spoon built in unlike US style 5.56 ckips.

You can re-use them indefinitely if you carefully pinch together the bottom ends of the rails slightly. I've found this little bit of pinch is usually enough to hold that last round from falling out of the clip when the tab has been broken off. I use a needle nose pliers and pinch just a bit at a time, then try it with a round to see if it holds, and adjust more, or less from there. When you have it right, the round will just slightly snap past the end of the clip, and then move freely up towards the top of the clip.

Quote:

---

Originally Posted by jakester

carefully pinch together the bottom ends of the rails slightly.

---

I did that too, was just reticent to mention it. I didn't think anyone else would have done it too...

or give the end a light tap with a nylon hammer and they tighten right up for several uses. Also I refill them from the spoon end.

Very few guys I know use the stripper clips. Recreational use or range use seems more trouble then they are worth. We did have bandolers with them in VN.

Quote:

---

Originally Posted by JimF4M1s

Very few guys I know use the stripper clips. Recreational use or range use seems more trouble then they are worth.

---

Main reason why I have them is because magazines are uncommon up here and very expensive when you do find them, and with regulations being what they are, 5 rounds goes quickly. This way a little less time is spent fumbling with reloading single rounds and they are easier to manipulate with gloves on during my typical -30*F winter shooting days. If had access to 15 or 30 round magazines for the little money you guys can I would just have more magazines. As it stands, the 3 magazines above have the same capacity as one unaltered 15 rounder.

I think my last magazine purchase was $40 each by the time it was taxed and shipped.

I use strippers because of ammo storage too. At least with AR, and can load ten per pistol mag. It still makes loading for the range simple and quick. If I take a top up out then there's no fumbling loose rounds. With Carbine, it's like stated. Two mags per stripper and simple to load. Most guys I know don't use them because they don't have the practice and fumble terribly with them. I store ammo in them to keep it organized a bit.

Quote:

---

Originally Posted by browningautorifle

I use strippers because of ammo storage too. At least with AR, and can load ten per pistol mag. It still makes loading for the range simple and quick. If I take a top up out then there's no fumbling loose rounds.

---

This is exactly what I do with AR pistol magazines as well, stripper clips and magazine chargers for 5.56 being very available for some reason...

I remember loading 30 rounds in the C7 service mags, strip down 10, fling the old clip away by flipping your mag support hand, strip 10, repeat, load up a 30 round magazine in 3 seconds. Nowadays I tend to want to keep the stripper clips.

Quote:

---

Originally Posted by Sentryduty

stripper clips and magazine chargers for 5.56 being very available for some reason

---

:rofl: Yup...but after I let mine all go, I had to buy them. That was a bite in the bag...

Quote:

---

Originally Posted by browningautorifle

.but after I let mine all go, I had to buy them.

---

Do you need more? I have an order in with an undefined delivery timeline, if it gets filled I could probably send some your way.

Quote:

---

Originally Posted by Sentryduty

Do you need more?

---

No thanks, I have about 300 now...

Those 3000 rounds on clips aren't going to feel like all that much if you end up with a few stand-to's before the next resupp.

LOL.

Quote:

---

Originally Posted by Sentryduty

a few stand-to's

---

Or a running reload...hopefully I don't have to do any more of that, I'm a bit gimpy for that. I'll have to stand and fight.

Quote:

---

Originally Posted by browningautorifle

I'll have to stand and fight.

---

The quality of a great soldier.

Quote:

---

Originally Posted by JimF4M1s

We did have bandolers with them in VN.

---

Glad you brought this up JimF, reminded me of having about a dozen fully intact bandos from VN era stored away. I also believe I have a couple from the Korean era. I Had completely forgot about them as they are stored in a over flow locker, not often dug out.

Thx to the OP for bringing up the stripper clips/spoons. Forgot about having a extra stash of those passed along from a friend years ago that I packed in that same trunk.
I have been using about a 1/2 dozen of these strippers for times when I have 2-4 guests shooting. You know it keeps me hopping keeping them loaded and shooting.
These are the only times I find myself using them. When just burning time and ammo, I like just hand loading to give me time to settle down.

On a side note,
Miss you guys... time has been really limited. Hard to get a chance to sit down and chat. Harder yet to get to one of the computers with kids taking on line classes.
Hoping to get more "me" time as things settle down a bit this winter.

Cheers All :cheers:
Charlie-painter777

Good to see you back Charlie...

Charlie, nice to see you back, it's been nine months.