chuckindenver: Thanks for the reply and the encouraging information. I did post the question on both forums, and I do appreciate your efforts in getting back to me.
Type: Posts; User: JKL; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
chuckindenver: Thanks for the reply and the encouraging information. I did post the question on both forums, and I do appreciate your efforts in getting back to me.
So I read the numerous posts in this and other forums concerning M1917 headspace--and now I am completely paranoid. I used a Field and a Go Gauge (Forester) and my main problem seems to be that I...
Thanks Bubba-7, from the left seems to be getting the most positive responses, and your comments about the pin head and the rest of the trigger housing sitting flush against the wall of the stock...
I am wondering if there is a correct way to install an M1 Carbine hammer pin--from the right or the left side? Everything I look at, read, and see in the old posts seems to be at odds with each...
I tend to agree with your comments about this seller and this item. In my limited time purchasing Carbine parts I am amazed at the number of sellers who are either misinformed or just choose to...
I am a little confused over the "allowable" level of restoration that i can make to my "mixmaster" M1 Carbines without being lumped into the category of someone who is destroying history and trying...
Thanks for the information...I've seen info on the "Bavarian" and other German carbines--now I will need to see what I can find about the Norwegian Coastal Artillery....JKL
Recently purchased a Winchester M1 Carbine and I am going through the parts to see what I ended up with. The trigger is marked LT and the Hammer shows an NH marking. Could these be variations of...
I have "cleaned" (not stripped) my Garand stock with lacquer thinner and have applied about 5 coats of BLO over the past several days. Since the last coat of BLO I have put three or four coats of...
I'm looking for some help with a rear sight problem--seems the sight has drifted off to the right side. Looks like the sight base was staked on front and back sides of both the right and left side...