+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: 7.92x33mm kurz/ StG44 cartridge headstamp?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Ed42's Avatar
    Join Date
    Apr 2018
    Last On
    09-03-2024 @ 04:51 PM
    Location
    Tennessee
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:12 PM

    7.92x33mm kurz/ StG44 cartridge headstamp?

    A few years ago, a friend found a cartridge in an old box and later showed it to me. Based upon the size I immediately was reminded of the WWII Germanicon StG44. It looks like a steel case to me with a pointed bullet reminiscent of the AK round but smaller in height. It is unfired. The headstamp is Wa then either 51 or S1 or St, then 12 then 44. Can someone tell me a little more about it? Thanks!!!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    jonnyc's Avatar
    Join Date
    Sep 2008
    Last On
    07-03-2024 @ 10:42 PM
    Location
    PA, USA
    Posts
    653
    Local Date
    10-31-2024
    Local Time
    08:12 PM
    Sure sounds like a wartime Kurz round, made by Hugo Schneider A.-G., Werk Leipzig, Germanyicon.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Ed42's Avatar
    Join Date
    Apr 2018
    Last On
    09-03-2024 @ 04:51 PM
    Location
    Tennessee
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:12 PM
    Thread Starter
    Thanks. I guess I should have posted this in the ammo section. Sorry. Thank you for the reply. My first post.

  6. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 06:59 PM
    Location
    Victoria BC
    Posts
    30,402
    Real Name
    Jim
    Local Date
    10-31-2024
    Local Time
    05:12 PM
    This is the cartridge that started my whole ammo collection...one of those.
    Regards, Jim

  7. #5
    Legacy Member Ed42's Avatar
    Join Date
    Apr 2018
    Last On
    09-03-2024 @ 04:51 PM
    Location
    Tennessee
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:12 PM
    Thread Starter
    I don't really know how I recognized it but something'in my brain just said, "that is a 43/44 round" the second I saw it. Never handled the rifle or carrridge but just knew it!!!!!!

  8. #6
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    10-31-2024
    Local Time
    08:12 PM
    Yep. 'WA' is Hugo Schneider A.-G., Werk Leipzig, Germanyicon. The '44' is the year it was made. The 7.92 x 33 is the original assault rifle cartridge. The AK was basically copied from the Stg 44 too.
    http://stevespages.com/jpg/cd792x33kurz.jpg
    Headstamp Codes - International Ammunition Association
    Spelling and Grammar count!

  9. #7
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 04:21 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,262
    Real Name
    A.N.
    Local Date
    10-31-2024
    Local Time
    08:12 PM
    Quote Originally Posted by Sunray View Post
    Yep. 'WA' is Hugo Schneider A.-G., Werk Leipzig, Germanyicon. The '44' is the year it was made. The 7.92 x 33 is the original assault rifle cartridge. The AK was basically copied from the Stg 44 too.
    Not really the AK and STG-44 have nothing in common really other than being intermediate cartridge rifles. That is a old myth that has been going around for years along the same quality as the Soviets can use our 7.62 rounds in their AKs but we can't use their ammo in our FNs.

  10. #8
    Legacy Member Bruce McAskill's Avatar
    Join Date
    Mar 2009
    Last On
    01-17-2023 @ 09:10 PM
    Posts
    1,880
    Local Date
    10-31-2024
    Local Time
    07:12 PM
    It's the old well the Japaneseicon could use our 30-06 in their 7.7 rifles but we could not use their ammo in ours. But there is quite a bit of truth in the Russians using the 8mm Kurz round to develop the 7.62x39 round. They captured the blue prints for this and for the Ultra 9mm pistol round that is all but the Russianicon Makarov. Of course the Russians claimed they developed all of these on their own and well before they captured the information in the 1945 time frame.

  11. #9
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 04:21 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,262
    Real Name
    A.N.
    Local Date
    10-31-2024
    Local Time
    08:12 PM
    7.62x39 originally started as 7.62x41 in roughly 1943 and then went though development to eventually become the 7.62x39 round. Not saying there was no influence between the Soviets and the Germans as everyone tried to learn from everyone else, but to say the AK-47 is a STG-44 copy is completely false. Completely different operating systems that only externally can be mistaken for the same rifle.

  12. #10
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    10-27-2024 @ 12:07 AM
    Location
    Brisbane
    Posts
    2,258
    Local Date
    11-01-2024
    Local Time
    10:12 AM
    The Polte Works had been heavily experimenting with "Kurz" rounds since the early 1930's. As Germanyicon and the Soviet Union were "good fraternal socialists" at the time, there was a fair bit of information exchange. The Germans even field-tested several of their very early tank concepts "somewhere in Russiaicon". Oddly enough, the crafty Russians appear NOT to have let on to the Germans about their development of the American "Christie" system that lead to the BT-1 and 2 and then into the T-34.

    The Russians had certainly not forgotten about their own Imperial era foray into the assault rifle business, the Federov. These were still to be found at the pointy end of the failed adventure in Finlandicon and also well into WW-2.

    Why did the Soviets choose the 6.5 x 50? Well, they had "acquired" a fair bit of it during the Russo-Japanese war and, being Russians, they never threw anything away. Here was a moderately powered cartridge that was light, sort-of rimless and with a LOT less recoil that their standard 7.62 x 54R. Gratuitous Federov video here:

    Britain made a LOT of 6.5 Jap ammo and sent it to the soviets during WW-2. Remember that back in WW-1, the Japaneseicon had been allies of Britain. Even before then, the entire Imperial Japanese Navy, its weapons, uniforms and service traditions were VERY closely modeled on Royal Navy practice. This extended to adopting .303 calibre machine-guns retaining the calibre until the end of WW-2. Taking it further, the adopted Britishicon ship-building practice right down to adopting "Admiralty Threads" for their nuts and bolts. This "transplanted" system has only in the last few years started to be supplanted by "metric".

    Their army was based on "Prussian" practice and thus went "metric' a lot earlier; except that the Type 30 and 38 Arisakas are full of very "Imperial" threads, because at the time, Britain had not only started to establish pretty rigorous standardization, but exported a LOT of manufacturing and metrology equipment all over the world. That is why the 98 Mauser has an "Imperial" pitch breech thread with the very British 55 degree Whitworth form.

    Japan shipped a prodigious quantity of (mainly) Type 30 rifles in 6.5 x 50 to Britain for training, so that .303 calibre rifles could be sent to the meat-grinder on the Western Front. This may have been the start of Kynoch's involvement in making 6.5 x 50 in Britain.

    It appears that a large quantity of the Japanese rifles were transferred to the Royal Navy and eventually to Davey Jones Locker.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. STG44 ammo need your help
    By mudgee in forum Ammunition and Reloading for Old Milsurps
    Replies: 8
    Last Post: 11-02-2015, 06:56 AM
  2. .300 AAC Blackout (7.62x34mm) AR15 vs. 7.92x33 STG44
    By imarangemaster in forum M16A2/AR15A2 Rifles
    Replies: 11
    Last Post: 02-11-2014, 11:22 AM
  3. FN in kurz is going to happen
    By Ben Walker in forum FNFAL Rifles
    Replies: 5
    Last Post: 01-26-2013, 06:25 PM
  4. Clarification regarding the STG44
    By JBS in forum Milsurps General Discussion Forum
    Replies: 3
    Last Post: 01-28-2012, 03:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts