-
Contributing Member
P38 ac45
Finally found a P38 I could afford today.
It's an ac45 b block with all three proofs and an fnh barrel. Numbers match. Parts supposed to be in the white are in the white. It does have black soft plastic grips that I do not believe are correct for this. Phosphated non marked magazine. It's wartime but not by much. March of 1945 from what I can gather. Finish is decent but has some hard dings in the metal, notably near the hammer well and the trigger guard. Bore is excellent, this one hasn't seen many rounds.
Paid $550 for it and considering the fnh barrel, I think that was a very good price these days.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
02-11-2018 06:43 PM
# ADS
Friends and Sponsors
-
Legacy Member
The grips may be durofol, if so then inside you'll see their diamond logo. Durofol were a black plastic-like material in use by that time and so could be correct for this very late war make. With three proofs, it was likely one of the last ones assembled at the plant before the 11th AD and 90th ID showed up and closed it.
-
-
-
Contributing Member
No markings on the inside of the grips but they do seem to match descriptions of Mauser grips. Double circles on left and center thing on right. Not positive though. I know very little about these.
-
-
Contributing Member
-
-
Legacy Member
They are Otto Single Type I grips. They are acceptable for this model.
-
Thank You to matthanne1 For This Useful Post:
-
Contributing Member
Found another eagle over swastika on the rear of the barrel.
-
-
Legacy Member
Great looking pistol, have you fired it
-
-
Contributing Member
No, I just got it on Sunday. It will go to the range my next trip which hopefully will be soon. I watched Hickock on You Tube shooting at steel plates at 80 yards with one of these. That guy is amazing sometimes.
-
-
Legacy Member
You have a very nice pistol. If you dig through this section you will find my post of my BYF 44 P38 which I found in beautiful nearly unused condition. Here is a link for complete disassembly which could be helpful How to disassemble P1 / P38 - WaltherForums . Here is another link as to the valuation and collectability of each model P38 http://p38forum.com/technical/P38Chart.pdf . Here is another link that will give you a good idea when it was made by serial number http://www.p38forum.com/P38ProductionDates.pdf . If your going to shoot it use ONLY STANDARD VELOSITY 9mm ammo with a bullet weight of 124gr which is what it was designed to use (Parabellum Round). 115 gr rounds might jam sometimes as they are shorter in overall length and 147gr rounds will beat up a 73 year old wartime production pistol more than it needs. Be aware that the slides have a tendency to crack at the bridge in front of the chamber and the locking blocks can crack too which will destroy any collectability the pistol has. For these reasons correct ammo is essential and try to avoid rapid fire which is hard to do with a P38! Enjoy and good luck with it. - Bill
-
Thank You to oldfoneguy For This Useful Post:
-
Contributing Member
Now I'm having second thoughts of shooting it. I never intended for it to be a safe queen but never intended to fire it a lot either. Maybe a magazine or two every once in a while. What type of risk of breakage is there? I don't think this one has been fired much but who knows. Lot of opinions both for and against out there. Rather have some solid data if I'm going to take the risk.
What about finding a cheap upper assembly and using that to shoot? Some guys talk about that also.
-