Mannequins

[koldt]

Does anyone have a source for mannequins in the Calgary area?

I'm not huge into uniforms, but I've got some stuff I would like to put together for some photos. I've seen some mannequin type of things that were just wire type bodies, and those would be fine.

And I was hoping not to spend a whole lot O money on them, if possible.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Sunray]

A real mannequin will cost a ton of money to buy. Know anybody who works in or manages a clothing shop? You might be able to use one or two for taking pictures, if you ask nicely in any clothing shop.
Failing that enlist some of your buddies to pose for you. Mind you, most uniforms are made for skinny 18 year olds.
Please join us at CanadianGunNutz.com - Powered by vBulletin

[dastier]

I'd be interested in the same in Winnipeg. Not the whole mannequin just a torso and head for a helmet and jacket display.

[koldt]

A real mannequin will cost a ton of money to buy. Know anybody who works in or manages a clothing shop? You might be able to use one or two for taking pictures, if you ask nicely in any clothing shop.
Failing that enlist some of your buddies to pose for you. Mind you, most uniforms are made for skinny 18 year olds.
Please join us at CanadianGunNutz.com - Powered by vBulletin

Thanks for the link. I might have to check out that gun site.

[Badger]

Thanks for the link. I might have to check out that gun site.

Merry Christmas partner ...

Regards,
Doug (Badger)

[Badger]

I'd be interested in same in Toronto area ...

Thanks ..

Regards,
Badger

[Maple_Leaf_Eh]

A full body department store mannequin will last many years, and the stores don't give them away. You'll probably be ahead faster to build something on your own with plywood, dimension lumber and imagination.

[dastier]

A full body department store mannequin will last many years, and the stores don't give them away. You'll probably be ahead faster to build something on your own with plywood, dimension lumber and imagination.

Yes, I'm thinking building something out of a wooden coat hanger with padding on the shoulders then a table stand with cardboard to fill out the chest and back of the jacket and cardboard tubes down the arm. I'll use appropriate coloured leather gloves for hands and just stuff the fingers,etc and fasten it to the cardboard ends.

For the head you can buy one of those foam heads at a flea market or something and stick it on the top of the hanger. Not perfect but should work.

[Peter Laidler]

Here's a good idea. What about a couple of those blow-up dolls? Surely there must be male examples made for 'needy' females (or even needy men come to think of it!). You can get the cheap version without real hair. You could use some camouflage cream to enhance the plastic features and usual pouting lips.

[Dan Wilson]

Here's a good idea. What about a couple of those blow-up dolls?

But wouldn't it be kinda hard to get the uniform on it????

Dan