+ Reply to Thread
Results 1 to 4 of 4

Thread: Rodda Combination Rifle

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    ClassicMark's Avatar
    Join Date
    Apr 2012
    Last On
    06-17-2012 @ 12:13 AM
    Location
    Virginia
    Posts
    5
    Local Date
    05-24-2024
    Local Time
    11:38 AM

    Rodda Combination Rifle

    I have come across a R.B. Rodda & Co Cape gun. I can't really find too much information on this and wanted to make sure it was an original manufacture before buying it. I don't have any photos right now but I will try to describe it as best I can to get an idea of it's authenticity.

    Here is a link for the pics: http://www.shotgunworld.com/bbs/cpg1....php?album=119

    The right barrel is a shotgun barrel, possibly about a 12 gauge. The left barrel is a rifle barrel and there is good rifling through the entire barrel. It is an underlever break action centerfire with R.B Rodda & Co of London and then it has the info from their Calcutta branch.

    It looks to be in very good condition and has a Serial Number on the bottom of the stock near the trigger guard, under the barrels and on on the inside of the front hand guard of 38080.

    If anyone can shed any light on this I would be grateful.

    I would like to thank everyone in advance for the assistance.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    05-24-2024
    Local Time
    12:38 PM
    Rodda did not MAKE all the guns they sold, but they sure exported a lot to the Colonies, especially to India.

    If you have one with the London address, it was made between 1910 and 1955; previously they had a Birmingham address.

    As a gun/rifle made under the Britishicon Proof Lw, it will be completely marked on the underside of the barrels/upper surface of the table. Barrels will be marked with chambering specs and Service loads. There should not be a lot of trouble producing ammo for the Rifle half, but you should be aware that chamber depths on the Shotgun side are emphatically NOT to American standards. The Brits kept to the old 2-inch and 2-1/2-inch chambers LONG after North America converted to the 2-3/4. This is no problem if you have one of those Lee Load-alls; you just trim the plastic cases and pull down a bit farther on the handle.

    Nice piece!

    Can you post some PICS for us all to drool at?
    .

  3. Thank You to smellie For This Useful Post:


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    ClassicMark's Avatar
    Join Date
    Apr 2012
    Last On
    06-17-2012 @ 12:13 AM
    Location
    Virginia
    Posts
    5
    Local Date
    05-24-2024
    Local Time
    11:38 AM
    Thread Starter
    I've posted the pics off this site. https://www.milsurps.com/vbpicgallery.php?do=view&g=580

    I appreciate your interest, if anyone has any information on this it would be greatly appreciated.

  6. #4
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-24-2024
    Local Time
    12:38 PM
    T'ain't exactly military surplus, but it's interesting:

    ClassicMark's combination gun:



    Last edited by jmoore; 05-24-2012 at 02:42 AM.

+ Reply to Thread

Similar Threads

  1. strange combination - VZ54 or SVD scope on a 91/30?
    By louthepou in forum Soviet Bloc Rifles
    Replies: 5
    Last Post: 03-19-2012, 03:07 AM
  2. P14 Combination Tool?
    By Dad in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 5
    Last Post: 03-11-2012, 10:38 PM
  3. Need Help!! Is this an SMLE Combination Tool?
    By Dad in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 03-10-2012, 01:38 AM
  4. SMLE Combination Tool
    By Dad in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 01-31-2012, 03:35 PM
  5. L85A2 Combination Tool ???
    By Simon P in forum Milsurps General Discussion Forum
    Replies: 1
    Last Post: 03-06-2010, 02:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts