-
FREE MEMBER
NO Posting or PM's Allowed
restocking a sport M1917
I’m in the process of restocking a m1917 sporter. I plan on adding the stock reinforcing bolt and the brass pin. Because I’ve noticed that a common problem reported is cracks in sportierized stocks. My question is this was this reinforcement added to the 1917 because of the increased recoil of the 30-06 or was it also on the p14?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
01-10-2012 11:33 AM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
My 3 P-14's have the reinforcing Pin and bolt.
-
-
Advisory Panel
if its glass bedded correctly..no need for bolts or pins.
-
-
FREE MEMBER
NO Posting or PM's Allowed
I glassed the forward recoail tang. I also made bushing from stainless steel tubing and glassed them in also. I floated the barrel. I still think I will install the reinforcing bolt anyway. Just to be on the save side. Thanks for the input