+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Fake rear sight confusion

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Arcieri's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2022 @ 09:54 PM
    Location
    Lakewood, Colorado
    Posts
    31
    Local Date
    04-28-2024
    Local Time
    01:59 PM

    Fake rear sight confusion

    A few years ago I purchased a couple Inland barreled receivers from CMPicon with the intent to build shooter rifles with parts from gun shows, internet, etc.

    Back then I bought a bag of 5 rear sights marked fake since the real ones were very pricey.
    Now, years later, I am back at the project and have a question on the sights.

    The bottom 4 on the picture are obvious fakes, but could the top square S one be an original? Or is it a "George Special" made by a humper with a pretty good eye for detail?

    Thanks
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:21 PM
    Location
    Victoria BC
    Posts
    29,945
    Real Name
    Jim
    Local Date
    04-28-2024
    Local Time
    12:59 PM
    You may have trouble getting hard answers on this as some see it as helping the humpers...
    Regards, Jim

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Arcieri's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2022 @ 09:54 PM
    Location
    Lakewood, Colorado
    Posts
    31
    Local Date
    04-28-2024
    Local Time
    01:59 PM
    Thread Starter
    I understand. A few times I would bring parts to Nick Daly to help me identify, but haven't seen him at any show here in Colorado in a year or two. Don't really have a local contact anymore.

    Ray

  6. #4
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,322
    Local Date
    04-28-2024
    Local Time
    03:59 PM
    You can compare yours to the one in this post:

    Interesting Winchester Carbine

    HTH,
    CH-P777

  7. #5
    Legacy Member INLAND44's Avatar
    Join Date
    Mar 2009
    Last On
    04-23-2022 @ 07:42 PM
    Location
    VA
    Posts
    1,134
    Local Date
    04-28-2024
    Local Time
    03:59 PM
    So the barreled receivers had no sights and you want to make shooters? Why not use USGI adjustable rear sights?

  8. #6
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    04-28-2024
    Local Time
    03:59 PM
    Was that one of the receivers sold by CMPicon that "may have unusable barrel still attached"?

    Neal

  9. #7
    Legacy Member Arcieri's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2022 @ 09:54 PM
    Location
    Lakewood, Colorado
    Posts
    31
    Local Date
    04-28-2024
    Local Time
    01:59 PM
    Thread Starter
    Quote Originally Posted by INLAND44 View Post
    So the barreled receivers had no sights and you want to make shooters? Why not use USGI adjustable rear sights?
    They did come with PI marked adjustable rear sights. The rest of the story is I wanted at least one rifle to shoot that "looked " like it came from the factory without spending a bunch of money.

    I already have some carbines purchased from CMPicon as they were released several years ago. They are all mixmasters with adjustable sights and I really didn't want to change out the sights on any of them.
    I shoot these carbines Attachment 59992also.

    Ray

  10. The Following 4 Members Say Thank You to Arcieri For This Useful Post:


  11. #8
    Legacy Member Arcieri's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2022 @ 09:54 PM
    Location
    Lakewood, Colorado
    Posts
    31
    Local Date
    04-28-2024
    Local Time
    01:59 PM
    Thread Starter
    QUOTE=Neal Myers;323453] Was that one of the receivers sold by CMPicon that "may have unusable barrel still attached"?



    Don't remember anything about unusable barrels in the CMP description.

    Here is a copy of the tag that came with one of the barrels.


    Ray Attachment 59993

  12. #9
    Moderator
    (Deceased Nov 16th, 2019)

    JimF4M1s (Deceased)'s Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2023 @ 10:08 PM
    Location
    USA
    Age
    74
    Posts
    3,439
    Local Date
    04-28-2024
    Local Time
    12:59 PM
    Nice box

  13. #10
    Legacy Member shadycon's Avatar
    Join Date
    Jun 2009
    Last On
    Today @ 10:23 AM
    Location
    NRV, Va.
    Posts
    773
    Real Name
    Gene Keller
    Local Date
    04-28-2024
    Local Time
    03:59 PM
    Nice collection!!GK
    M1a1's-R-FUN!!!!!!!!!!!!!!!!!!!!!!!!
    TSMG's-R-MORE FUN!!!!!!!!!!!!!
    ENJOY LIFE AND HAVE FUN!!!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. IBM flip sight, real or fake?
    By LeagleEagle in forum M1/M2 Carbine
    Replies: 5
    Last Post: 11-01-2011, 09:26 PM
  2. M1 garand rear sight WW2 sight
    By nchristian in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 11-18-2010, 11:19 AM
  3. Is the front sight really fake?
    By Greg V in forum M1/M2 Carbine
    Replies: 25
    Last Post: 07-07-2009, 10:00 PM
  4. Rear sight base for Target Sight
    By m1903rifle in forum .22 Smallbore
    Replies: 8
    Last Post: 06-03-2009, 01:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts