+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 42

Thread: Why U.S. Govt Still Making 03/A3's in 1944?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Hammer's Avatar
    Join Date
    Oct 2021
    Last On
    07-24-2024 @ 09:46 PM
    Location
    FLORIDA
    Posts
    56
    Real Name
    Hammer Hartsell
    Local Date
    10-31-2024
    Local Time
    07:32 PM

    Why U.S. Govt Still Making 03/A3's in 1944?

    By 1944 with millions of M1icon Garands and millions of M1 Carbines having been made and still in massive Wartime Production, why were Remington 03A3s still be produced so late in the War? Who were they intended to be issued to?

    Here's my only 03/A3. Its a sweet firing warrior that kicks like a Mule every time I shoot it :-)

    Attachment 120604Attachment 120605Attachment 120606Attachment 120607
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 04:39 PM
    Location
    USA
    Posts
    4,395
    Real Name
    Robert Seccombe
    Local Date
    10-31-2024
    Local Time
    06:32 PM
    easy answer, rear units like MP and truck drivers on the Red Ball Express plus alot of other others did not require the M1icon rifle.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member BEAR's Avatar
    Join Date
    Mar 2009
    Last On
    04-07-2024 @ 11:10 AM
    Location
    PNW
    Posts
    682
    Real Name
    Tim Rarick
    Local Date
    10-31-2024
    Local Time
    04:32 PM
    They were made late in the war so the could be loaned to Greece and then cause massive confusion in the collector community when they were returned and sold by the CMPicon.

    BEAR

  6. #4
    Legacy Member Hammer's Avatar
    Join Date
    Oct 2021
    Last On
    07-24-2024 @ 09:46 PM
    Location
    FLORIDA
    Posts
    56
    Real Name
    Hammer Hartsell
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    Thread Starter
    Were 03A3's cheaper to make? Was it because it would have cost the Govt more to build new Machinery for making more Garands than using the already older existing machinery from making 03's???

  7. #5
    Legacy Member Fushigi Ojisan's Avatar
    Join Date
    Jul 2009
    Last On
    Today @ 07:05 PM
    Location
    Where the B&O and PRR cross in MD
    Posts
    87
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    Quote Originally Posted by RCS View Post
    easy answer, rear units like MP and truck drivers on the Red Ball Express plus alot of other others did not require the M1icon rifle.
    This. My father was a mechanic/truck driver and said they put one in each truck.


  8. #6
    Contributing Member mmppres's Avatar
    Join Date
    Mar 2014
    Last On
    10-10-2024 @ 08:58 AM
    Location
    butler pa
    Age
    59
    Posts
    1,098
    Real Name
    mike
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    Because the manufacturers already were tooled up from WW1 to make that action. It was very easy to put it right back into production. Made sense to the government to keep producing them as a war material.

  9. #7
    Legacy Member Hammer's Avatar
    Join Date
    Oct 2021
    Last On
    07-24-2024 @ 09:46 PM
    Location
    FLORIDA
    Posts
    56
    Real Name
    Hammer Hartsell
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    Thread Starter
    Quote Originally Posted by mmppres View Post
    Because the manufacturers already were tooled up from WW1 to make that action. It was very easy to put it right back into production. Made sense to the government to keep producing them as a war material.
    Does anyone know how many 03A3s were made during World War II?

  10. #8
    firstflabn
    Guest firstflabn's Avatar
    Quote Originally Posted by Hammer View Post
    By 1944 with millions of M1icon Garands and millions of M1 Carbines having been made and still in massive Wartime Production, why were Remington 03A3s still be produced so late in the War? Who were they intended to be issued to?
    You had the glimmer of a couple of good questions there, but kinda spoiled it by leaping to a conclusion. It took two PhD historians who had served during the war 1700 pages in the Army's official logistics history to explain how the system worked.

    How did you determine that 'millions and millions' of carbines and Garands produced by 1944 should have been enough?

    To have a chance of drawing an accurate conclusion, you would need to know at a bare minimum: the total force size, how equipment was assigned, reserve requirements, loss rates, and reporting methods. On top of all that, some knowledge of lead times for production and distribution would be helpful.

    As often attributed to Yogi Berra, "Predictions are hard; especially about the future." Logistics planning is dependent on predictions about the future, so Yogi would have been right at home.

    I won't attempt to give you a lesson in the basics of WWII logistics, you'll have to do that yourself, but I'll give you some data from a 1944 OD planning document. A monthly report showing current stock status along with projected near term procurement and demand levels was created in mid-44. It was a way to help planners avoid overproducing one item while the need for others went unfilled. Classic Econ 101: efficient use of resources in the face of scarcity. Doesn't matter if their projections turned out to be right - it was their best guess at the moment using available info. These calculations were used to determine production quantities - for thousands of major items.

    The earliest of these reports I have for the '03A3 (including '03 and 03A1) is dated 31 Aug 44. In the section titled 'Total Supply Less Total Demand' for the following month (in other words, 'how many over or under projected need do we have right now?) it shows 18,821 (enough, but just barely). I don't know what the status was six months earlier when '03A3 production was ended, but looks like they made a pretty accurate prediction. BTW, that same month showed carbine status as -196,300, a rather large deficit, unlike what you suggested.

    As an example of how uncertainty is part of war, this Aug 44 report projects zero future need for this item for international aid (going out two years). A month later, the status report showed 200,000 would be required for international aid. So, in one month, requirements had increased from zero to 200,000. Are you beginning to see how much fun it was to be a planner in WWII and why reserve stocks were kept?

    My guess is this sudden increase might relate to a decision to significantly expand the Chinese army, but it's just a guess based solely on timing. As our advance across the Pacific went faster than expected - plus giving up on building a large Chinese army as a logistical impossibility, this requirement for international aid soon dropped by about 75%.

    One last point: this is an OD report. It tracks quantities in OD custody - in depots, not yet requisitioned by using units. Once shipped, OD was out of the picture (except for receiving returned items for repair and storage - at which point it would reappear in OD bean counts).

    So, after all that, the answer to one of your questions is: the calculations factoring current stock, projected production, and projected issue demand shows your assumptions were wrong on 1944 supply status.

    Your other question about how equipment is assigned is an important one, but I'm out of play time for today, but the anecdotes presented so far are misleading at best. Google 'WWII T/O&E' and report back with what your learn.

  11. The Following 3 Members Say Thank You to firstflabn For This Useful Post:


  12. #9
    Legacy Member Hammer's Avatar
    Join Date
    Oct 2021
    Last On
    07-24-2024 @ 09:46 PM
    Location
    FLORIDA
    Posts
    56
    Real Name
    Hammer Hartsell
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    Thread Starter
    Quote Originally Posted by firstflabn View Post
    You had the glimmer of a couple of good questions there, but kinda spoiled it by leaping to a conclusion. It took two PhD historians who had served during the war 1700 pages in the Army's official logistics history to explain how the system worked.

    How did you determine that 'millions and millions' of carbines and Garands produced by 1944 should have been enough?

    To have a chance of drawing an accurate conclusion, you would need to know at a bare minimum: the total force size, how equipment was assigned, reserve requirements, loss rates, and reporting methods. On top of all that, some knowledge of lead times for production and distribution would be helpful.

    As often attributed to Yogi Berra, "Predictions are hard; especially about the future." Logistics planning is dependent on predictions about the future, so Yogi would have been right at home.

    I won't attempt to give you a lesson in the basics of WWII logistics, you'll have to do that yourself, but I'll give you some data from a 1944 OD planning document. A monthly report showing current stock status along with projected near term procurement and demand levels was created in mid-44. It was a way to help planners avoid overproducing one item while the need for others went unfilled. Classic Econ 101: efficient use of resources in the face of scarcity. Doesn't matter if their projections turned out to be right - it was their best guess at the moment using available info. These calculations were used to determine production quantities - for thousands of major items.

    The earliest of these reports I have for the '03A3 (including '03 and 03A1) is dated 31 Aug 44. In the section titled 'Total Supply Less Total Demand' for the following month (in other words, 'how many over or under projected need do we have right now?) it shows 18,821 (enough, but just barely). I don't know what the status was six months earlier when '03A3 production was ended, but looks like they made a pretty accurate prediction. BTW, that same month showed carbine status as -196,300, a rather large deficit, unlike what you suggested.

    As an example of how uncertainty is part of war, this Aug 44 report projects zero future need for this item for international aid (going out two years). A month later, the status report showed 200,000 would be required for international aid. So, in one month, requirements had increased from zero to 200,000. Are you beginning to see how much fun it was to be a planner in WWII and why reserve stocks were kept?

    My guess is this sudden increase might relate to a decision to significantly expand the Chinese army, but it's just a guess based solely on timing. As our advance across the Pacific went faster than expected - plus giving up on building a large Chinese army as a logistical impossibility, this requirement for international aid soon dropped by about 75%.

    One last point: this is an OD report. It tracks quantities in OD custody - in depots, not yet requisitioned by using units. Once shipped, OD was out of the picture (except for receiving returned items for repair and storage - at which point it would reappear in OD bean counts).

    So, after all that, the answer to one of your questions is: the calculations factoring current stock, projected production, and projected issue demand shows your assumptions were wrong on 1944 supply status.

    Your other question about how equipment is assigned is an important one, but I'm out of play time for today, but the anecdotes presented so far are misleading at best. Google 'WWII T/O&E' and report back with what your learn.
    Wow, thank you!
    your detailed information makes me glad I didn’t have to read the two PhD Historians 1700 page Army official history report on this topic. Looks like I lucked out with just an executive summary :-)

    I’m just a simple 37 year combat infantry Marine and what I think you are saying is that the War Planners in 1944 didn’t think they had enough rifles produced for the numbers they potentially may need before the war ended.

    I would still like to know if there’s any data or information on how many 03A3s were made during World War II? It seems everybody tracks and knows quite a bit about Garands and M1icon Carbines but not much information on the 03A3s, at least what I can find.

    Also, you mentioned a report dated 31 August 1944 and then you mention that the 03A3 production had ended six months prior to that. The barrel on my Remington is dated August 44. Did you mean the 03A3 receivers had stopped being produced six months prior?
    Last edited by Hammer; 10-11-2021 at 08:30 PM.

  13. Thank You to Hammer For This Useful Post:


  14. #10
    Legacy Member Durango56's Avatar
    Join Date
    Feb 2018
    Last On
    10-25-2024 @ 09:47 AM
    Location
    Ohio
    Posts
    86
    Real Name
    Ken May
    Local Date
    10-31-2024
    Local Time
    07:32 PM
    There's an article in American Rifleman that says Remington made 707,629 and Smith-Corona made 234,580 03A3 in WWII

  15. Thank You to Durango56 For This Useful Post:


+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Similar Threads

  1. Where to shop for a govt 1911 45
    By c east in forum 1911/1911A1 Service Pistol
    Replies: 0
    Last Post: 06-13-2013, 01:49 PM
  2. L E in 45-70 Govt
    By newcastle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 03-18-2013, 05:41 PM
  3. Replies: 23
    Last Post: 07-04-2012, 05:10 PM
  4. Canadian Govt 1911?
    By vinson in forum 1911/1911A1 Service Pistol
    Replies: 0
    Last Post: 06-11-2011, 07:27 PM
  5. colt govt model?
    By davfink in forum 1911/1911A1 Service Pistol
    Replies: 3
    Last Post: 03-23-2009, 11:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts