+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24

Thread: A Strange (and somewhat cobbled) No.4 Mk.2

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-05-2024
    Local Time
    02:50 AM

    A Strange (and somewhat cobbled) No.4 Mk.2

    This rifle was thrown out for consideration a couple of years ago, but we never really figured out who was responsible. Maybe some new insights now?

    Again, no complete rifle shots! (Must be a mental defect...)
































    About the only conclusion reached at the time was that the S/N location was poorly placed due to the proximity of the hardened L/H locking recess. (As per Captain Laidlericon)

    The really cobbled bit in the next post...
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by jmoore; 10-02-2010 at 08:04 AM. Reason: restored photos

  2. Thank You to jmoore For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-05-2024
    Local Time
    02:50 AM
    Thread Starter
    A pic of the fine breeching job:




    Nice shim, eh?

    It has the Long Branch barrel and bolt, but not much else to ID it. Had a mate to it, but its gone now- the renumbered bolt was a couple of digits off the rest of it.

    Feel free to comment!
    Last edited by jmoore; 10-02-2010 at 07:57 AM.

  5. Thank You to jmoore For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-28-2024 @ 11:48 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,513
    Real Name
    Peter Laidler
    Local Date
    05-05-2024
    Local Time
    07:50 AM
    It IS a mid 50's Fazakerley body. There were a LOT of these kicking around in the bond area (the secure area for 'master components' and barrels) when the factory closed and on closure, they went into MoS secure storeage where they were later used to produce the 'new-build' L39. Hence the new numbers of UE70Axxxx (rifles already numbered kept their old number).

    I think someones 'acquired' this body and made up a No4 from bits. There's no serial number so he's cobbled something up so that it can be proofed and brought into legal circulation.

    That's my guess

  8. #4
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    01-10-2022 @ 02:07 PM
    Posts
    1,150
    Local Date
    05-05-2024
    Local Time
    06:50 AM
    I've got a rifle with the identical form of numbering - but on mine its clearly a rack number, as there are also clear Savage markings & serial number. My rifle appears to be a 100% standard Britishicon issue - it has a 1949 FTR and is suncorite'd. It has no signs of foreign ownership.








    If we were to assume that the 4/0734 number on your rifle is a British rack number, then the fact it also appears on the bolt must mean that the rifle & bolt were considered "matched" at the time they were given the rack number - a "mismatched" rifle would not have been issued in British service.

    Alternatively, that bolt could be a later addition from the same gunsmith who put a shim on the barrel - I see the font is different between the two versions of 4/0734....

    The broad arrow inspection mark on the left side of the receiver looks like the 1950s type of Fazakerley/Enfield factory mark - FTR?

  9. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    madcratebuilder's Avatar
    Join Date
    Jan 2009
    Last On
    05-17-2016 @ 10:32 AM
    Location
    Northern Orygun
    Age
    74
    Posts
    330
    Local Date
    05-04-2024
    Local Time
    11:50 PM
    The reciever body shares many of the same inspecter marks as both my 1955 faz rifles, one a UF, other a PF.

    Peter, by date, both the UF and PF rifles were being made at the same time. On the same line or two different lines?

  10. #6
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-05-2024
    Local Time
    02:50 AM
    Thread Starter
    Its a late one for sure. Note the lack of a mag cutoff boss on the lower RH side.

    The other one I had was a UF333xx S/N - I can't remember the last two digits right now. It too had been around the block a few times.

  11. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-28-2024 @ 11:48 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,513
    Real Name
    Peter Laidler
    Local Date
    05-05-2024
    Local Time
    07:50 AM
    The last No4's from Fazakerley were breeched up with breeching up washers. These were available in the Armourers system too

  12. #8
    Moderator
    (Lee Enfield Forum)


    tbonesmith's Avatar
    Join Date
    Sep 2007
    Last On
    04-05-2024 @ 02:42 AM
    Location
    Sydney, Australia
    Posts
    1,076
    Real Name
    Thomas Smith
    Local Date
    05-05-2024
    Local Time
    05:50 PM
    I've got a similar built up rifle on an unmarked late No4mk2 action(no maker, model or SN) with no mag cut off hump. It's painted in suncorite with a BSA(m47c) barrel. Someone told me the action body was a BSA too.
    The story I got with it is that when a barrel was shot out in rifle, sometimes the barreled action was replaced, as opposed to just the barrel, and then receiver numbered to the bolt/rest of the rifle.
    can anyone verify that?

  13. #9
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,713
    Local Date
    05-04-2024
    Local Time
    11:50 PM
    Casting about for some logical explanation for such a pot pourri of parts, my guess would be India or some other 2nd/3rd World country where they took whatever bits they had and slapped them together. India would my first choice because didn't they get a sizeable quantity of parts when they bought the Fazackerly factory, which might well have included un-numbered late Mk2 bodies?

    Still, one would expect them to at least erase the old numbers.(?)

  14. #10
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    04-28-2024 @ 02:57 AM
    Posts
    1,807
    Local Date
    05-05-2024
    Local Time
    07:50 AM
    The bit that got my attencion was the BNP stamp on the body,I've no idea where Jmoor is based (UKicon, USAicon?) so its seen some civvy time.

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Strange Enforcer
    By Alan de Enfield in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 64
    Last Post: 01-26-2014, 07:04 AM
  2. Strange .22 mag
    By tcart74 in forum .22 Smallbore
    Replies: 1
    Last Post: 09-30-2009, 02:46 PM
  3. Strange cartridge, anyone?
    By ob'98 in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 09-06-2009, 07:47 PM
  4. Strange US&S markings
    By emmagee1917 in forum 1911/1911A1 Service Pistol
    Replies: 21
    Last Post: 08-26-2009, 01:30 PM
  5. Strange Yogo SKS
    By sdh1911 in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 12-04-2006, 01:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts