+ Reply to Thread
Results 1 to 3 of 3

Thread: Trying to ID these bags purchased ~1980 ...

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    voyaager's Avatar
    Join Date
    Jul 2011
    Last On
    10-19-2012 @ 08:14 PM
    Location
    Alaska
    Posts
    5
    Local Date
    05-04-2024
    Local Time
    01:51 AM

    Trying to ID these bags purchased ~1980 ...

    I bought these bags in 1980.
    I had seen them around surplus stores off and on for several years.
    I think I had seen them with medical and /or chemical insignias stenciled on them.
    I bought these to use as saddlebags for a motorcycle road trip to Alaska.
    They did the job nicely.

    They came with "CY - I064A/ATC" stenciled on them.
    So, my question is: What are they?

    EDIT:
    I took a look inside one of the bags and found stenciled on the inside end of the bag:
    ORTHOPEDIC EQUIPMENT CO., INC
    USAicon 120-68-C-3448

    This lends credence to my calling them medical duffels through the years.




    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by voyaager; 07-09-2011 at 10:35 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    conec's Avatar
    Join Date
    Jan 2011
    Last On
    01-27-2015 @ 10:53 AM
    Location
    Prescott, Arizona USA Earth
    Posts
    136
    Real Name
    Chris
    Local Date
    05-04-2024
    Local Time
    02:51 AM
    With the US mark on the inside it appears to be rigger made?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    voyaager's Avatar
    Join Date
    Jul 2011
    Last On
    10-19-2012 @ 08:14 PM
    Location
    Alaska
    Posts
    5
    Local Date
    05-04-2024
    Local Time
    01:51 AM
    Thread Starter
    Quote Originally Posted by conec View Post
    With the US mark on the inside it appears to be rigger made?
    Being not very knowledgeable about military equipment terms "rigger made" threw me.
    After looking around a bit, I understand it to mean contract supplied non-standard equipment in this instance.

    So, I looked up the supplier, OEC, and found this:
    Founded in Warsaw, Indiana in 1942, OEC originally marketed to orthopedic surgeons--hence, its name at that time: "Orthopedic Equipment Company.' OEC's equipment for orthopedic surgeons originally included pins, plates, and other orthopedic devices necessary for correcting skeletal deformities in patients. In the process of marketing these orthopedic devices, it became apparent that providing real-time imaging to the surgeon would be an invaluable tool; thus, in the early 1970s, OEC moved in the direction of mobile X-ray imaging.

    This leads me to believe that these bags were used for packing x-ray type equipment components used in mobile hospitals.
    Does that sound reasonable?

    I saw many of these bags off and on in Seattle area surplus stores in the mid to late '70s.
    They were made of a very heavy canvas and were very sturdily made.
    Using a couple of Alice Pack shoulder straps to fasten them together at the D-rings, they slung over the back of my motorcycle and held enough gear to spend the summer on the road camping out in reasonable style.
    Last edited by voyaager; 07-10-2011 at 04:09 PM.

+ Reply to Thread

Similar Threads

  1. All my bags are packed, I'm ready to go....
    By sakorick in forum M1/M2 Carbine
    Replies: 6
    Last Post: 05-07-2011, 07:39 AM
  2. Imitation/Replica M1A1s/bags
    By Mikey51 in forum M1/M2 Carbine
    Replies: 0
    Last Post: 11-28-2010, 02:34 AM
  3. Just purchased a No. 4 Mk1
    By sprydle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 08-25-2010, 12:14 PM
  4. Commercial Sterling SMG Bayonet Circa 1980
    By Simon P in forum Edged Weapons Forum
    Replies: 10
    Last Post: 08-10-2010, 01:25 PM
  5. Bride bags a nice turkey on her wedding day!
    By Louis of PA in forum The Watering Hole OT (Off Topic) Forum
    Replies: 2
    Last Post: 04-30-2009, 01:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts