+ Reply to Thread
Results 1 to 10 of 10

Thread: First Time Shooting My Garands

Click here to increase the font size Click here to reduce the font size
  1. #1
    Amsdorf
    Guest Amsdorf's Avatar

    First Time Shooting My Garands

    I got my M1icon Garands out to the range today and was pleased with the results. I shot with both my 1943 SA CMPicon Service Grade and the 1955 SA Collector I picked up recently. I did best with the collector grade, which is basically like new and very tight. I've got two picture. I put up a law enforcement target out at 100 yards and concentrated on head shots and upper torso shots. Pretty pleased with results.

    Then I put up a 9" diameter paper plate and shot a pretty tight group, a couple fliers, but for fifty year old eyes and first time with the Garand I was pretty pleased. I shot from the bench, holding it tight into my shoulder and resting the front on top of small bean bag put on top of a 30 cal ammo can.

    Here are the results:



    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to Amsdorf For This Useful Post:


  3. # ADS
    Friends and Sponsors
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-21-2024
    Local Time
    05:48 PM
    They are one of the finest rifles on the planet even today. It'll grow on you. They're quite tunable for accuracy. Reliability is rarely an issue. Easy to maintain. Just a wee bit on the heavy side, and hard to scope efficiently.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    SlayerNut's Avatar
    Join Date
    Nov 2011
    Last On
    07-18-2012 @ 08:17 PM
    Location
    Raleigh, NC
    Age
    53
    Posts
    8
    Local Date
    05-21-2024
    Local Time
    04:48 PM
    Quote Originally Posted by jmoore View Post
    They are one of the finest rifles on the planet even today. It'll grow on you. They're quite tunable for accuracy. Reliability is rarely an issue. Easy to maintain. Just a wee bit on the heavy side, and hard to scope efficiently.
    I agree, I love my Garandicon. It's an all correct post war, made in Feb. '55 and it's very accurate and fun to shoot.

    PS: jmoore, aren't you on CSF? If not there's someone on there with the same user name.

  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Charlie59's Avatar
    Join Date
    Sep 2009
    Last On
    04-04-2012 @ 06:40 PM
    Posts
    178
    Local Date
    05-21-2024
    Local Time
    05:48 PM
    Quote Originally Posted by Amsdorf View Post
    I got my M1icon Garands out to the range today and was pleased with the results. I shot with both my 1943 SA CMPicon Service Grade and the 1955 SA Collector I picked up recently. I did best with the collector grade, which is basically like new and very tight. I've got two picture. I put up a law enforcement target out at 100 yards and concentrated on head shots and upper torso shots. Pretty pleased with results.

    Then I put up a 9" diameter paper plate and shot a pretty tight group, a couple fliers, but for fifty year old eyes and first time with the Garand I was pretty pleased. I shot from the bench, holding it tight into my shoulder and resting the front on top of small bean bag put on top of a 30 cal ammo can.

    Here are the results:

    https://www.milsurps.com/images/impo...0/Badguy-1.jpg

    https://www.milsurps.com/images/impo...0/Garand-1.jpg
    As far as I'm concerned, there are two kinds of accuracy. The first is "bench rest" accuracy, where you can shoot 5 round groups, and cover all 5 holes with a quarter. The next type is what I call "they're coming over the wall" accuracy, clearly illustrated in your top target. This is what these rifles were built for, and as you've shown us, are clearly up to the task!

    Charlie

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 03:57 PM
    Location
    Victoria BC
    Posts
    29,999
    Real Name
    Jim
    Local Date
    05-21-2024
    Local Time
    02:48 PM
    Quote Originally Posted by Charlie59 View Post
    This is what these rifles were built for, and as you've shown us, are clearly up to the task!
    I don't know where you got that. These rifles are capable of exceptional accuracy.
    Regards, Jim

  9. #6
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-21-2024
    Local Time
    05:48 PM
    Originally posted by SlayerNut:
    PS: jmoore, aren't you on CSF? If not there's someone on there with the same user name.

    CSF? I'm a former lurker of the old Joustericon forum, and post a very little on the new Culver's site, but otherwise I'm only here or on a M14icon forum.

    ---------- Post added at 05:15 AM ---------- Previous post was at 05:14 AM ----------

    (And lurk the FN SCAR 17 forum...)

  10. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Charlie59's Avatar
    Join Date
    Sep 2009
    Last On
    04-04-2012 @ 06:40 PM
    Posts
    178
    Local Date
    05-21-2024
    Local Time
    05:48 PM
    Quote Originally Posted by browningautorifleicon View Post
    I don't know where you got that. These rifles are capable of exceptional accuracy.
    I didn't say they weren't capable of pinpoint accuracy. All I'm saying is that they were engineered for function, durability and military (combat) accuracy---something like 4" at 100yd. or thereabouts. Amsdorfs' law enforcement target is a perfect illustration of how a M1icon does the job it was intended to do. Match grade rifles, handloads, tuning, and so on brings these rifles to the next level, accuracy-wise. Every shot on Amsdorfs' silhouette target would kill or incapacitate it.
    Last edited by Charlie59; 11-10-2011 at 01:28 PM.

  11. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    SlayerNut's Avatar
    Join Date
    Nov 2011
    Last On
    07-18-2012 @ 08:17 PM
    Location
    Raleigh, NC
    Age
    53
    Posts
    8
    Local Date
    05-21-2024
    Local Time
    04:48 PM
    Quote Originally Posted by jmoore View Post
    CSF?
    CSF=Carolina Shooters Forum....

  12. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    gulliver62's Avatar
    Join Date
    Dec 2009
    Last On
    01-10-2013 @ 08:48 PM
    Location
    Atlanta, GA
    Posts
    71
    Local Date
    05-21-2024
    Local Time
    04:48 PM
    NIce shooting. As stated, you will be able to tune either for accuracy if you like. Or just go out and enjoy the 'PING'. Given that you now have 2, you might want to clear room in the safe they tend to multiply somehow. Find a John C. Garandicon match near you and go out and experience a line full of people shooting them in rapid fire. It a great time.

  13. #10
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-21-2024
    Local Time
    05:48 PM
    Must be another Jehoshaphat Moore, SlayerNut. We're everywhere!

    Amsdorf, try shooting the Garands from the standing position. That's really fun. Especially once you've found a natural stance. I probably have put more rounds downrange that way than any other when shooting these rifles. Kneeling seems not much more accurate, and recoil is more noticable. Sitting and prone are more work, as there's all the sling business to attend to, but accuracy can be as good as off the bench- sometimes!

+ Reply to Thread

Similar Threads

  1. It's about time!
    By Bill Hollinger in forum The Watering Hole OT (Off Topic) Forum
    Replies: 6
    Last Post: 06-25-2011, 06:22 PM
  2. Thank you for your time and help.
    By Jinx in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 1
    Last Post: 04-08-2011, 04:18 PM
  3. War time Pix
    By FTD1167 in forum M1/M2 Carbine
    Replies: 3
    Last Post: 01-15-2011, 01:47 PM
  4. Shooting a P14 for the first time
    By Dumby in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 09-13-2007, 08:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts