+ Reply to Thread
Page 3 of 7 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 69

Thread: Question on Long Branch #4 (T)

Click here to increase the font size Click here to reduce the font size
  1. #21
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-28-2024 @ 11:48 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,513
    Real Name
    Peter Laidler
    Local Date
    05-03-2024
    Local Time
    02:28 AM
    Bolt action. To save me saying it all over and over again, please believe me, but in my honest opinion, as a real life, old time, REAL Armourer of just a few years standing, that your rifle is as real and genuine and original as it gets. And, for what it's worth, in my heart of hearts and knowing how the REAL, out there system works, I wouldn't mind betting that many of those 'as they left the factory' rifles you yearn for have been made up to 'as they left the factory' spec. Not all of course but sometimes, I have to have my doubts..........

    I wouldn't mind betting that in a few years time, people will be collecting 'as they left the factory' L1A1 rifles with ALL BSA or ALL Enfield made parts. Believe me, I used to see them................., factory fresh, still in the sealed air tight wrappers, a complete mix of BSA, Fazakerley and Enfield parts. I know I'm wasting my time as I repeat it time and time again

    Call me sentimental or just mellowing as I get a bit older after having been and seen them all for many years, but I just think that these grand old ladies, especially that classic masterpiece, the No4T deserves more.................. But just reflect on the fact that while I was the snipers Armourer here at Warminster many moons ago and STILL see them coming through, I NEVER heard a sniper (I mean a REAL sniper as opposed to a good shot or just a collector - but the real McCoy.....) ask whether he could be issued with an 'as factory gate issue' sniper rifle. Nope......., they wanted one that the user on the last course had passed the course with.

    I think we should leave concourse for car shows. Only my thoughts and I could be wrong

  2. The Following 7 Members Say Thank You to Peter Laidler For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #22
    Contributing Member boltaction's Avatar
    Join Date
    Dec 2006
    Last On
    10-02-2023 @ 12:21 PM
    Location
    BC Interior
    Posts
    642
    Local Date
    05-02-2024
    Local Time
    06:28 PM
    Thread Starter
    Thank you! Myself, I don't see a problem with it, and I shouldn't have used the word "problem" in my previous post. I really like the rifle, and it's in really nice shape. It's been a working rifle, and is original as it left service. I'm just concerned with potential "complaints" about it if I drop dead and my wife goes to sell it. Personally, unforeseen financial disaster or hardship necessity in the future notwithstanding, I don't ever plan on selling it and hope to will it to one of my two kids....... If my work life ever allows again, I hope to take it out to the range and test it out. The turrets on the scope turn freely, but there is a bit of corrosion here and there--I am going to send the scope to Warren for a checkover.

    I should clarify as well that I don't "yearn" for a "as it left the factory" rifle, although if one showed up at a local garage sale I sure wouldn't complain! I like mint things as much as the next person, but some of my favorite rifles are the ones which have clearly seen service somewhere. I've got a large number of Rosses which were issued and have the knocks of use, and one of my favorite SMLE's is not my mint matched ones, but one which has a nice smooth patina, someone's initials "dinged" into the wood with a bullet nose, and an old scar on the forewood that looks like it got hit with a shell splinter or something. It's like those folks on the eternal search for a mint, all matching early war production or pre-war production Mauser Kar-98k. Those rifles are around (and cost almost as a Brit #4(T) these days), but really, one which was actually carried for several years by a soldier on the losing side of a war is likely going to have had some part switched out, either in the field or at the battalion level. I lke them with a bit of character!

    Thanks so much everyone for your feedback. It has been very helpful and educational.

    Cheers, and Merry Christmas!

    Ed
    Last edited by boltaction; 12-17-2011 at 12:06 PM.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #23
    Contributing Member boltaction's Avatar
    Join Date
    Dec 2006
    Last On
    10-02-2023 @ 12:21 PM
    Location
    BC Interior
    Posts
    642
    Local Date
    05-02-2024
    Local Time
    06:28 PM
    Thread Starter
    BTW, I hope no one is offended by my use of the actual word "Christmas" at this time of year, as opposed to the Canadianicon currently accepted politically correct, bland, non-denominational, inoffensive and almost meaningless "Season's Greetings" or "Happy Holidays" which is all I seem to be able to find on cards nowadays.........

    Ed

  7. #24
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-02-2024
    Local Time
    09:28 PM
    Merry Christmas!

  8. #25
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    04-27-2024 @ 05:16 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,440
    Real Name
    Roger Payne
    Local Date
    05-03-2024
    Local Time
    02:28 AM
    To me this thread highlights the difference between 'original' (as in 'the day it left the factory when assembled), & 'genuine'. It is a perfectly good LB 4T that has been through Britishicon service rework post-war, & it is genuine, but it is not in 'original' (as it was first assembled) condition. Does it matter? I guess that depends on the individual. I suppose the market tends to reflect a preference for 'as first issued' rifles, & they do fetch a premium; but then maybe they couldn't tell the tales this one could.

    Apart from anything else, the suncorite will come off with meths & LB parts are not so difficult to find, if you did have a mind to 'restore' it.....!

    As an aside there were 4-5 90L rifles in the batch we bought back in 1997, so they were all accepted into service with UK forces; some had been suncorited & others not.

    ATB
    Last edited by Roger Payne; 12-18-2011 at 07:02 AM.

  9. Thank You to Roger Payne For This Useful Post:


  10. #26
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-28-2024 @ 11:48 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,513
    Real Name
    Peter Laidler
    Local Date
    05-03-2024
    Local Time
    02:28 AM
    I lay awake at night wondering, and indeed, fretting as to whether/if we will ever see an 'original' or 'factory fresh' or 'factory gate' L42 advertised in the future - and how would we ever be able to tell? They were actually made (?) converted as a bunch or hotch potch of parts. And if a mix of parts is good enough for an 'original' done-on-the-cheap but deadly accurate L42, then it's good enough for anything in my opinion.

    I know I keep banging on about it but if you ever see anyone on your local rifle range shootng/testing an L96 or the AW green stocked variant, please, please. PLEASE ask if you can shoot a few rounds, even if it's just to say that you've done it. They are a well and truly worthy successor to the L42. I love it to bits

  11. Thank You to Peter Laidler For This Useful Post:


  12. #27
    Contributing Member boltaction's Avatar
    Join Date
    Dec 2006
    Last On
    10-02-2023 @ 12:21 PM
    Location
    BC Interior
    Posts
    642
    Local Date
    05-02-2024
    Local Time
    06:28 PM
    Thread Starter
    Quote Originally Posted by Roger Payneicon View Post
    To me this thread highlights the difference between 'original' (as in 'the day it left the factory when assembled), & 'genuine'. It is a perfectly good LB 4T that has been through Britishicon service rework post-war, & it is genuine, but it is not in 'original' (as it was first assembled) condition. Does it matter? I guess that depends on the individual. I suppose the market tends to reflect a preference for 'as first issued' rifles, & they do fetch a premium; but then maybe they couldn't tell the tales this one could.

    Apart from anything else, the suncorite will come off with meths & LB parts are not so difficult to find, if you did have a mind to 'restore' it.....!

    As an aside there were 4-5 90L rifles in the batch we bought back in 1997, so they were all accepted into service with UK forces; some had been suncorited & others not.

    ATB
    I like your comment about the difference between original and genuine. If a rifle is missing a part I will replace it. However, while this rifle could be "restored" by putting LB wood back on it, LB parts, new buttplate, etc, IMHO that would in itself be a form of "fakery", because one would have to stamp a new serial number on the fore stock, etc, and it would be taking parts off that were put on in the course of the rifle's service, making it neither original nor genuine any more. I plan on leaving the rifle exactly as it is, aside from getting the scope tidied up a bit--it has lovely optics, BTW.

    Ed
    Last edited by boltaction; 12-18-2011 at 10:40 AM.

  13. Thank You to boltaction For This Useful Post:


  14. #28
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    04-27-2024 @ 05:16 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,440
    Real Name
    Roger Payne
    Local Date
    05-03-2024
    Local Time
    02:28 AM
    Ed, I don't blame you!

    ATB

  15. #29
    Legacy Member rgg_7's Avatar
    Join Date
    May 2007
    Last On
    Today @ 07:41 PM
    Location
    Niagara
    Posts
    530
    Real Name
    Ron
    Local Date
    05-02-2024
    Local Time
    09:28 PM
    Interesting comments on original and genuine. Ed's No4 T is genuine and I'd leave as is. The rifle was painted with "Suncorite" and could damage the substrate fiinish if removed. The furniture has been changed for Brit wood...Canadianicon "T's" had the distinctive "Maltese Cross" on the forend, never were serialized...finding a replacement is dam near impossible. The front band is late Brit. Rear sight is Brit CR403 which makes it post war...again getting a Maltese marked rear LB will be tough and pricey. Mag might be Brit as well...Canadian never serialized. Also notice that the bolt has been reserialized...looks like electropencil..."L" is wrong font and same appears on mag and forestock. I suspect that if you pull the rear handguard the rifle been rebarrelled as rifle has a size 2 bolthead.....most are "0" or "1" on Canadian "T's". Enjoy the rifle, leave it as is.

  16. #30
    Legacy Member PrinzEugen's Avatar
    Join Date
    Mar 2008
    Last On
    09-08-2023 @ 06:42 AM
    Location
    Staffordshire
    Posts
    580
    Local Date
    05-03-2024
    Local Time
    02:28 AM
    Great rifle ed - I'm 100 per cent in agreement with Peter/Roger et al. If I wanted 'new from constructor' rifles I'd buy some horrible new plastic thing. I like military rifles - if they're still 'as left service' then great. But as this is more or less impossible to judge, I'm happy with 'as correct as can be barring obvious fakery/brand new bits'. In any case these guns were produced during one of the greatest conflicts ever seen with the purpose of killing the enemy effectively using the technology/equipment available for mass production at that time. Then they probably continued to serve in the armed forces for another 20 years before being sold off dirt cheap. Then the person who bought the sniper rifle, which certainly would not have been viewed it in general with the awe/reverence of today may well have actually shot it themselves, in the process having worn out bits replaced and so on. So nearly 70 years on now we have what we have. My 4t has had an interesting life - and certainly isn't as left the factory. But thinking about its rich history etc is what makes it so interesting for me.
    The internet, with all manner of experts whose knowledge is based on what they've read in forums as opposed to what they've done, are creating this 'all matching' mantra without really, in my view understanding what it means.

+ Reply to Thread
Page 3 of 7 FirstFirst 1 2 3 4 5 ... LastLast

Similar Threads

  1. Another Long Branch marking question
    By scottlee in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 09-10-2012, 05:22 AM
  2. Long Branch MK1 sight question.
    By Lucite in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 09-18-2011, 09:35 AM
  3. Long Branch Question
    By Hip's Ax in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 07-17-2009, 07:42 AM
  4. 1943 Long Branch Scope Question
    By carney31 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 07-08-2008, 12:28 PM
  5. Long Branch marking question?
    By Admiral Fishwich in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 09-15-2007, 06:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts