+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: Blue Sky Productions, Inc. (Arlington, VA) Winchester M1 Garand

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    SVTCobra4pt6's Avatar
    Join Date
    Mar 2012
    Last On
    12-08-2012 @ 08:33 AM
    Location
    Rhode Island
    Posts
    2
    Local Date
    04-28-2024
    Local Time
    06:00 AM

    Blue Sky Productions, Inc. (Arlington, VA) Winchester M1 Garand

    I recently purchased a Winchester M1icon Garand (built May 1944) from a friend of a friend, I got what I felt was a very good deal until reading about the negative attitude towards Blue Sky. When I bought the M1 I was completely unaware of the issues surrounding Blue Sky, such as warped barrels from heavy stamping, poor/improper repair, etc. However, everything I read about Blue Sky has to do with Springfield M1s, I can't find any information about Winchester.

    I took the M1 out this past weekend and it shot straight, I didn't notice any issues at all.

    I have attached some photos, and I am curious in getting the opinions of others who are much more experienced with M1s than I am.

    From what I can tell there does not seem to be much (if any) muzzle wear (photo below), the barrel looks almost new and the rifling looks fine with no visible issues.
    The Blue Sky stamp on the barrel does not look to be too heavy (to me), there are parts of the stamp that are not pressed (the bottom and top of several letters).

    But if anyone has knowledge of what I should look for or any concerns from what they see in the photos could please give me some feedback I would be incredibly thankful!

    (Please keep in mind these photos were taken with a point and shoot camera with a wide angle lens so the straight lines may not look exactly straight in the photos.)


    Blue Sky Stamp


    Muzzle


    Receiver


    Receiver and Rear Sight


    Receiver Bolt Closed


    Receiver Bolt Open

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Legacy Member us019255's Avatar
    Join Date
    Mar 2008
    Last On
    03-30-2024 @ 04:12 PM
    Location
    reluctantly in Santiago, MN
    Age
    81
    Posts
    266
    Real Name
    Ed Hauser
    Local Date
    04-28-2024
    Local Time
    04:00 AM
    The purpose of a Garandicon is to send 150 grain 30 caliber projectiles rapidly to the point of aim, your rifle does this. Anything in addition to this is just a bonus.

    Enjoy your piece and don't worry about nit picking collectors who obsess about import stamps and replaced parts.
    Ed reluctantly no longer in the Bitterroot

  3. The Following 2 Members Say Thank You to us019255 For This Useful Post:


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    04-28-2024
    Local Time
    06:00 AM
    You may have lucked into a nice Blue Sky, but most of them were worn out. The barrels had been whipped out with jointed cleaning rods to the point that some would take a bullet up to the shoulder. Most had either worn out op rods, or the receiver guide was worn out as the rods wouldn't stay in place. With these you could obsess about the bullet rapidly flying down the range tumbling over and over in the vicinity of your point of aim.

  6. #4
    Contributing Member Bob Seijas's Avatar
    Join Date
    Mar 2009
    Last On
    04-26-2024 @ 09:24 PM
    Location
    Montville, NJ and Delray Beach, FL
    Posts
    2,223
    Real Name
    Bob Seijas
    Local Date
    04-28-2024
    Local Time
    07:00 AM
    IIRC, they were all reconditioned and refinished by Howa Heavy Industries.
    Real men measure once and cut.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    SVTCobra4pt6's Avatar
    Join Date
    Mar 2012
    Last On
    12-08-2012 @ 08:33 AM
    Location
    Rhode Island
    Posts
    2
    Local Date
    04-28-2024
    Local Time
    06:00 AM
    Thread Starter
    Thanks for the info! I'm really hoping I did just happen to get my hands on one that is actually in good shape. The stock is a little dinged, but that's part of the history and story behind the guns.

    By any chance is there any way to track a serial number beyond Month/Year of manufacturing? Such as which branch of the military or even more specific. I have tried checking several links in the Stickys but a lot of them seem to be inactive or dead links.

    Thank you again, I really appreciate the input.
    Last edited by SVTCobra4pt6; 03-15-2012 at 10:47 PM.

  8. #6
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    04-28-2024
    Local Time
    07:00 AM
    Quote Originally Posted by SVTCobra4pt6 View Post

    By any chance is there any way to track a serial number beyond Month/Year of manufacturing? Such as which branch of the military or even more specific. I have tried checking several links in the Stickys but a lot of them seem to be inactive or dead links.

    Thank you again, I really appreciate the input.
    You might luck into some old records that might indicate where a rifle was at some particular time but, in general, there is no way to determine the history of any one rifle.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    MontaukTrl's Avatar
    Join Date
    Mar 2009
    Last On
    08-22-2018 @ 09:34 PM
    Location
    Heart of Dixie
    Posts
    15
    Local Date
    04-28-2024
    Local Time
    05:00 AM
    I bought a Springfield at the time these came into the country and while it had been rebuilt at sometime in its life, it did look like a recent reconditioning. Do you mean recondition and rebuild at the time of import or some time before that?

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    04-28-2024
    Local Time
    06:00 AM
    In the Blue Sky imports I saw, the reconditioning appeared to be a fresh coat of phosphate. It must have been reserved for the really bad ones, as I saw a few that appeared to have been fresh from a U.S. military facility rebuild.

  11. #9
    Legacy Member cherokee5425's Avatar
    Join Date
    Nov 2009
    Last On
    04-24-2024 @ 04:23 PM
    Posts
    32
    Real Name
    Randy Locher
    Local Date
    04-28-2024
    Local Time
    07:00 AM
    I just picked up a M1icon marked Blue Sky. I hope to take it to the range tomorrow. All parts are SA except the operating rod it is marked NM. stck is pretty crappy. Serial number puts it at Feb 1944. I am hopeing to find a SA marked stock with the proper cartouches on. I hope I didn't let my desire to have an M1 screw up by not noticing it was marked Blue Sky.

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    BILLY T's Avatar
    Join Date
    Mar 2009
    Last On
    04-13-2012 @ 09:25 AM
    Location
    VIRGINIA
    Posts
    6
    Local Date
    04-28-2024
    Local Time
    07:00 AM

    Blue sky

    you must remember that when these rifles came into the country they were cherry picked before sending out for sale to us common people.the ones that may come in from Korea will have the same thing happen!i did see some very nice blue sky carbines and rifles but they were sold to the chosen few.at the time they were released it was the only way some people had to get these rifles so most were happy to get them.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 11-038 Garand Picture of the Day - Arlington
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 0
    Last Post: 02-06-2011, 12:01 PM
  2. Another Winchester Arlington Ordnance import
    By coneten in forum M1/M2 Carbine
    Replies: 2
    Last Post: 10-02-2010, 04:37 PM
  3. Winchester Arlington Ordnance
    By coneten in forum M1/M2 Carbine
    Replies: 2
    Last Post: 09-29-2010, 04:37 PM
  4. 10-104 Garand Picture of the Day -Arlington,
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 1
    Last Post: 04-21-2010, 09:45 AM
  5. #268 garand Picture of the Day Arlington
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 4
    Last Post: 10-24-2009, 07:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts