-
FREE MEMBER
NO Posting or PM's Allowed
1942 No4 Mk1*. Savage
New to the site and this firearm. Hope someone an answer a couple of questions. I would like to use this firearm to maybe hunt o just shoot.
1) on the websites I see scope mounts (ATI ENF0141) and stocks for the Lee Enfield No4 Mk1 but not specific for the Savage. Will these parts fit my Savage?
2) Rifle came without a magazine so I purchased one on eBay with the s or 5 mark on it. The magazine fits but shells do not seem to want to come up enough to be pushed into chamber. Even out of the gun & pushing cartridge with my thumb the nose seems to not center and gets hung up in magazine
Any thoughts. Thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
05-08-2012 11:17 PM
# ADS
Friends and Sponsors
-
Legacy Member
Hi The ATI ENF0141 is made for the No4 rifle and should fit your Savage Mk1* as regards the stock any No4 MK1 should fit the rifle and does not need to be Savage specific, but as with any stock might need final fitting.
As for the magazine a picture might help?
Terry
-
-