+ Reply to Thread
Results 1 to 6 of 6

Thread: Canadian MkIII helmets

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member flying pig's Avatar
    Join Date
    Mar 2012
    Last On
    Yesterday @ 09:17 PM
    Location
    BC, Canada
    Posts
    299
    Local Date
    04-27-2024
    Local Time
    03:03 AM

    Canadian MkIII helmets

    Hey guys. I'd been looking for one of these for a while and hadn't turned up much when I came across this one on ebay. I hadn't been able to find much on them and hadn't really asked around about them, but when this one turned up I decided to take the chance.

    It appears to be repainted unless they did them in different colors? I can't find a maker or date stamp on the shell, but with the textured paint I bet it would have been filled. Liner is marked V.M.C. 1945. Late war or maybe post war replacement? Its C^ marked and marked with number 107.

    I wound up buying a second one from the fellow a week later, it has the original tan colored paint, netting and a Canadianicon marked 1945 liner as well. I can't wait to see that one up close, I had to have it too.

    How did I do helmet guys?













    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to flying pig For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:36 AM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    02:03 AM
    These are the last helmet we had before adopting the US M1icon helmet. We started using them just before D-Day and they are slang termed the D-Day helmet. I can tell you from personal experience we painted our helmet with any shade of OD that we had at the time, usually truck paint or some for winter or desert as required. No detraction from value there as far as I'm concerned. The suspensions came in sizes as yours is marked. You changed the suspension and you were in business. They made them after the war too. I only have one of these helmets, it was a battlefield pickup while I was on peacekeeping duty and it was out in the green line. I have it here today, but it's not in as good shape as yours. Yours looks good.
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member dieppe42's Avatar
    Join Date
    Sep 2008
    Last On
    02-29-2024 @ 07:13 PM
    Location
    Penticton B.C.
    Posts
    59
    Local Date
    04-27-2024
    Local Time
    04:03 AM
    Nice MkIII helmet.....as you probably know, they were issued to the 3rd Canadianicon Infantry Division (exclusively) and didn't come with liners.....just the shell. The order of the day was to swap out your liner from the MkII and stick it in this one. My cousin was a captain in the Cameron Highlanders of Ottawa, landed on D-day and wore one of these......I've got a picture of him somewhere with it. The later MkIV helmets had the lower strap rivet, are much more common and command much less in collectibility. The colour of your helmet is close to the original which was a "dirty-brown" shade, but as Jim mentioned above ..... it was the chap wearing it and availability of paint that dictated it's eventual tone. The stampings on these MkIII turtle helmets are about 2" back of the front brim and usually are stamped BMB with the 1944 date....some will be 1945, but the MkIII types were a SHORT PRODUCTION RUN, which is why they are collectible.

  7. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:36 AM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    02:03 AM
    Right...mine is the later one with the low rivets.
    Regards, Jim

  8. #5
    Contributing Member flying pig's Avatar
    Join Date
    Mar 2012
    Last On
    Yesterday @ 09:17 PM
    Location
    BC, Canada
    Posts
    299
    Local Date
    04-27-2024
    Local Time
    03:03 AM
    Thread Starter
    Thank you for the comments and info guys. I will have to post the pictures of my other one tonight or tomorrow. It has a color similar to the P-37 webbing inside and for outside base with a very earthy brown over it. It has the same chinstrap as this one and a '45 dated liner. It has a net too. The finish on it is in a lot more worn shape but everything else is in great shape too

  9. #6
    Contributing Member flying pig's Avatar
    Join Date
    Mar 2012
    Last On
    Yesterday @ 09:17 PM
    Location
    BC, Canada
    Posts
    299
    Local Date
    04-27-2024
    Local Time
    03:03 AM
    Thread Starter






    Here's the other one!

+ Reply to Thread

Similar Threads

  1. Canadian SMLE No1 MkIII* Long Branch Refurbs??
    By Pblatzz in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 17
    Last Post: 11-11-2020, 12:34 PM
  2. Can someone help me identify these helmets?
    By Unheilig in forum Vintage Military Gear
    Replies: 11
    Last Post: 10-13-2012, 05:28 PM
  3. Canadian snipers with Ross MkIII and P14 rifles in September 1918.
    By Surpmil in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 01-08-2012, 03:36 PM
  4. Canadian issued 1918 RSAF Enfield MkIII*
    By Anzac15 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 12-15-2011, 04:59 PM
  5. German M35 helmets
    By Dan Wilson in forum The Watering Hole OT (Off Topic) Forum
    Replies: 13
    Last Post: 12-03-2009, 01:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts