+ Reply to Thread
Results 1 to 5 of 5

Thread: Lee Enfield No4 MK I

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    jdcru001's Avatar
    Join Date
    Jan 2017
    Last On
    01-17-2017 @ 11:36 PM
    Location
    Florida
    Posts
    3
    Local Date
    05-04-2024
    Local Time
    07:30 PM

    Lee Enfield No4 MK I

    Hey y'all,

    I have been doing a lot of research on enfields and have decided to buy a No. 4 to start with until I can find a quality ore-WWII SMLE. I was curious though, is $400 still too much to pay for a good No. 4? I have been looking at one that is stellar. It is an ROF-Maltby. The bore is shiny and bright, wood is matching and nearly perfect, and the receiver only has a very small amount of aging and wear. The thing I am unsure about is the bolt doesn't match the other parts of the rifle. Everything else matches. When on gunbroker and other similar sites, these types of Enfield's are selling for tremendous sums. The one I am looking at (as described above) is selling for $628.00.

    This is mainly a question on the increased value of the No. 4 MK I, not buying advice per se.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by jdcru001; 01-13-2017 at 03:49 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member chuckchili's Avatar
    Join Date
    Apr 2010
    Last On
    02-13-2021 @ 04:23 PM
    Posts
    117
    Local Date
    05-04-2024
    Local Time
    06:30 PM
    I think $400 is too much to pay. I have too been faced with this dilemma. Best I could tell, you can still find an all matching No 4 in the neighborhood of $350 if you're patient. I recently bought an all matching one for $280 on GB which I think I got a decent deal. I personally would not buy an unmatching one for near $600.

  4. Thank You to chuckchili For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 03:58 PM
    Location
    Victoria BC
    Posts
    29,960
    Real Name
    Jim
    Local Date
    05-04-2024
    Local Time
    05:30 PM
    Pics would help greatly but a full wood rifle described as you have should be good value at what you quote.
    Regards, Jim

  7. #4
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 11:55 AM
    Location
    South West Western Australia
    Posts
    7,767
    Real Name
    CINDERS
    Local Date
    05-05-2024
    Local Time
    08:30 AM
    $400 if it is good as you say and the bore is good then go for it having a mis match bolt is not that big an issue if its just a shooter as long as it was fitted correctly are you able to have it inspected by a gunsmith who has experience in the lee enfields. As Jim said pictures can assist to a certain degree with those with the knowledge about these weapons pics of the markings on the receiver, left wrist strap, any markings on the stock and so on that way the chaps can pretty much give you the low down on the rifle up to a point without actually getting there hands on it.

    Be aware though there is a condition called "ENFIELD ACCUMULARTIS" (ENFIELDITIS for short) which infects you after the first one you buy this causes you to keep buying them and is very hard to cure.......be careful

  8. #5
    Legacy Member P246's Avatar
    Join Date
    Aug 2016
    Last On
    11-02-2022 @ 12:11 AM
    Location
    Osawatomie,Ks
    Posts
    122
    Local Date
    05-04-2024
    Local Time
    07:30 PM
    If I find all all matching No 4 Mark 1 with good bore and no stock issues or missing parts I'd go as much as $400.00 tops but prefer 350ish. Unless it's a numbers matching correct Longbrach 1941....$450.00 to 475.00 for that rare bird.

+ Reply to Thread

Similar Threads

  1. Update: How to wrap an Enfield pull-through and steps for Enfield care & cleaning
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 09-13-2013, 09:30 AM
  2. 1924 ShtLE (Short Lee-Enfield) No.1 MkV Rifle (Mfg by RSAF Enfield)
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 04-07-2007, 12:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts