+ Reply to Thread
Results 1 to 6 of 6

Thread: 7.62x51mm NATO Stripper Clips (WARNING ENTER AT YOUR OWN RISK)

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member nzl1a1collector's Avatar
    Join Date
    Aug 2008
    Last On
    04-22-2024 @ 03:06 AM
    Location
    New Zealand
    Posts
    621
    Real Name
    Kevin
    Local Date
    04-28-2024
    Local Time
    12:56 AM

    7.62x51mm NATO Stripper Clips (WARNING ENTER AT YOUR OWN RISK)

    20.5 years ago I started a little 'homepage' website about 7.62x51mm Stripper Clips in an effort to try and decipher the various makers Markings/Countries. For 6 years I managed to updates to the site, then things went quiet, then the ISP closed down their homepages and web hosting, so I lost access as I had also lost the password, so the site languished and then disappeared.

    Like the Phoenix, the site has risen from the ashes. There is more information then you ever needed to know about 7.62 NATO Chargers and Stripper Clips, Bandoleers, Magazine Charging Adaptors, Ammo Boxes, Links and Belts, and at some stage magazines.

    Have a look at your own risk and if you see any errors/omissions/mistakes or if you have examples that could be added please let me know. I'm always looking for new examples.



    7.62x51mm NATO Chargers and Stripper Clips
    Check out my website about 7.62x51mm NATO Stripper Clips and Chargers. Its sure to bore you to sleep.
    https://neocities.org/site/762natoclips

  2. The Following 17 Members Say Thank You to nzl1a1collector For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    04-25-2024 @ 09:34 PM
    Location
    The wild west of England
    Posts
    3,405
    Real Name
    Mr Clark
    Local Date
    04-27-2024
    Local Time
    01:56 PM
    Quote Originally Posted by nzl1a1collector View Post
    20.5 years ago I started a little 'homepage' website about 7.62x51mm Stripper Clips in an effort to try and decipher the various makers Markings/Countries. For 6 years I managed to updates to the site, then things went quiet, then the ISP closed down their homepages and web hosting, so I lost access as I had also lost the password, so the site languished and then disappeared.

    Like the Phoenix, the site has risen from the ashes. There is more information then you ever needed to know about 7.62 NATO Chargers and Stripper Clips, Bandoleers, Magazine Charging Adaptors, Ammo Boxes, Links and Belts, and at some stage magazines.

    Have a look at your own risk and if you see any errors/omissions/mistakes or if you have examples that could be added please let me know. I'm always looking for new examples.

    https://www.milsurps.com/images/impo...pperclip-1.jpg

    7.62x51mm NATO Chargers and Stripper Clips
    Nice one Kev, well done on your site resurrection mate, a massive increase in our knowledge base in one hit!
    .303, helping Englishmen express their feelings since 1889

  5. Thank You to mrclark303 For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Legacy Member nzl1a1collector's Avatar
    Join Date
    Aug 2008
    Last On
    04-22-2024 @ 03:06 AM
    Location
    New Zealand
    Posts
    621
    Real Name
    Kevin
    Local Date
    04-28-2024
    Local Time
    12:56 AM
    Thread Starter
    Now all you have to do is go down the rabbit hole and start to check your chargers/stripper clips for the markings. Remember if there is nothing on the back, it could be under the spring. These can be easily removed by pressing in one of the tabs with the nose of a round or a pen and pushing the spring to the side. and there could be a surprise waiting for you.

    Does anyone have any FN 7.62x51mm ammunition on original Clips? Especially looking for mark two clips (two pips on each side and phosphated) They wont have any markings, nor will the later 1 pip (Mark 3 Charger).

    This makes ID'ing the clip very difficult and I have a number of examples that are languishing in the 'Australianicon' and 'Indian' Charger pages as that's where they originated from, but I think they are reused clips and could of been supplied by Belgiumicon.

    Mark 2 Charger




    Mark 3 Charger


    Check out my website about 7.62x51mm NATO Stripper Clips and Chargers. Its sure to bore you to sleep.
    https://neocities.org/site/762natoclips

  8. #4
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 07:03 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,512
    Real Name
    Peter Laidler
    Local Date
    04-27-2024
    Local Time
    01:56 PM
    STRIPPER CLIPS....................! Reminds me of when I was writing a book about the Sten Gun. Molly Tree, the daughter of Harold Turpin said something like '.....who'd ever have thought that there was just so much to write about a little gun that my dad designed on the kitchen table over a couple of evenings.....'. Reminds me of stripper clips. Who'd have thought there was so much to write about

  9. The Following 5 Members Say Thank You to Peter Laidler For This Useful Post:


  10. #5
    Legacy Member enbloc8's Avatar
    Join Date
    Mar 2009
    Last On
    04-12-2024 @ 06:38 PM
    Posts
    235
    Local Date
    04-27-2024
    Local Time
    07:56 AM
    Quote Originally Posted by nzl1a1collector View Post

    Does anyone have any FN 7.62x51mm ammunition on original Clips? Especially looking for mark two clips (two pips on each side and phosphated) They wont have any markings, nor will the later 1 pip (Mark 3 Charger).
    Would they have been repurposing leftover .30-06 clips? I ask because I have some clips of the Mark 2 pattern that I use with .30-06 in M1903s.

  11. #6
    Legacy Member nzl1a1collector's Avatar
    Join Date
    Aug 2008
    Last On
    04-22-2024 @ 03:06 AM
    Location
    New Zealand
    Posts
    621
    Real Name
    Kevin
    Local Date
    04-28-2024
    Local Time
    12:56 AM
    Thread Starter
    Generally no as they don't match the official patterns.

    Are the clips you use silver/nickle plated? if so they will be those Swedishicon clips they sell all over eBay They are 'Bright' with 2 pips each side. I think FN even put out 'Mauser' clips that the Mark 2 are based off. If you think that 7.62x51NATO is involved..... its an absolute nightmare collecting others clips trying to differentiate between models... Luckily I don't collect those.
    Check out my website about 7.62x51mm NATO Stripper Clips and Chargers. Its sure to bore you to sleep.
    https://neocities.org/site/762natoclips

+ Reply to Thread

Similar Threads

  1. 7.62x51mm NATO question
    By Longshaor in forum Ammunition and Reloading for Old Milsurps
    Replies: 10
    Last Post: 08-01-2014, 11:44 PM
  2. c96 stripper clips.
    By arado in forum Other Military Service Pistols and Revolvers
    Replies: 0
    Last Post: 06-29-2013, 06:44 AM
  3. Stripper/chargers for 7.62 Nato
    By lngstrt in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 19
    Last Post: 04-28-2010, 02:11 AM
  4. stripper clips
    By ob'98 in forum M1/M2 Carbine
    Replies: 7
    Last Post: 08-24-2009, 06:50 PM
  5. Surplus 7.62x51mm NATO scopes?
    By Dimitri in forum Milsurps General Discussion Forum
    Replies: 20
    Last Post: 05-19-2008, 01:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts