+ Reply to Thread
Results 1 to 6 of 6

Thread: Would like your opinions of this Remington 1903-a4

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member ghost07's Avatar
    Join Date
    Jul 2014
    Last On
    12-29-2023 @ 11:00 AM
    Location
    Fisherville, KY
    Posts
    14
    Local Date
    04-27-2024
    Local Time
    03:56 PM

    Would like your opinions of this Remington 1903-a4

    I recently purchased a Remington block 1 1903–a4 serial number 3423806 and barrel date of 9-43. I would appreciate your thoughts about its authenticity and condition. I have used Pryor’s Collecting the American Sniper Rifle 1900 to 1945 as my reference. The receiver, bolt, stock, barrel, trigger guard and butt plate all appear correct. I have not yet disassembled it to check it completely. The only thing I have found is the Weaver scope marking plate is marked Telescope, M73B1 Stock No 7579931 Serial No 635029. The serial number 34149 is electro penciled on the right side. According to Pryor this plate was used on the block 3 rifles. The cartouches and markings all appear correct. There is no arsenal markings on the left side of the butt stock on only a single P proof on the bottom of the stock indicating that this rifle has never been through arsenal rehab. I requested and got a letter from CMPicon stating that this rifle has been sold on their auction site on September 14, 2004. That could explain the scope difference as I don’t think CMP sold sniper rifles with scopes. Finally I had my gunsmith field strip the rifle and look at it. He felt that the rifle had been shot very little if ever and found traces of cosmolineicon in the receiver, bolt, and all under the follower spring. Please feel free to give me any comments you may have. Thanks you for your assistance

  2. Thank You to ghost07 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,846
    Local Date
    04-27-2024
    Local Time
    10:56 PM
    Since you were asking for comments, you are in the wrong forum. This is the subforum for the P.14/M1917 rifle, you should better post this in the M1903 subforum .


    Personally, the stock cartouches feel a bit odd to me, but that could also be just the pictures. Is there any stamp in the magazine cutoff stock recess? And would you mind showing the cutout for the bolt handle on the stock?


    Would need to check, but aren't the stamps in front of the magazine guard some that you only find on arsenal refurbished rifles?


    Also I would check with CMPicon. Since you said it was auctioned, they should possibly still have the pictures available. You would then know whether this rifle was sold exactly like this back then, or if something was changed.
    Last edited by Promo; 11-03-2023 at 07:27 AM.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member martin08's Avatar
    Join Date
    Jul 2015
    Last On
    Today @ 04:26 AM
    Location
    Maine
    Posts
    323
    Local Date
    04-27-2024
    Local Time
    04:56 PM
    Can you get your money back?

  7. #4
    Legacy Member 728shooter's Avatar
    Join Date
    Dec 2014
    Last On
    03-06-2024 @ 04:39 PM
    Location
    South Florida
    Posts
    74
    Local Date
    04-27-2024
    Local Time
    03:56 PM
    I don't see a s/n on the right side of the receiver. Looks to me like this is a wanna-be clone of a 1903-A4....

  8. #5
    Legacy Member Roy W's Avatar
    Join Date
    Aug 2015
    Last On
    04-25-2024 @ 08:19 AM
    Location
    Hampshire
    Posts
    561
    Local Date
    04-27-2024
    Local Time
    03:56 PM
    The only photo you need to tell if it is genuine is the left hand side of the receiver. A3-04's were all stamped like this in order that the scope mount did not obscure the designation. If you can't see this then it isn't genuine.

  9. #6
    Legacy Member M94/14's Avatar
    Join Date
    Mar 2009
    Last On
    04-22-2024 @ 04:43 AM
    Posts
    145
    Local Date
    04-27-2024
    Local Time
    02:56 PM
    The barrel has had a front sight base on it at one time, you can see the wear lines in the pic. I don't know if 03A4's were originally assembled with barrels where the front sight was already installed, and then later removed, or installed without front sight base from the outset. Not sure what would account for the wear. Barrel replaced??? The stock appears to me like it may have been sanded, but not sure due to the pics.
    Last edited by M94/14; 01-20-2024 at 09:13 AM.

+ Reply to Thread

Similar Threads

  1. opinions on 1903
    By rice 123 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 29
    Last Post: 03-19-2017, 10:51 AM
  2. Remington M1903 - Your opinions about
    By Bizio in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 12
    Last Post: 09-21-2012, 07:14 PM
  3. Opinions on this Remington 1903A3?
    By clarkmilitaria in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 7
    Last Post: 07-21-2011, 11:18 AM
  4. Remington 1903A3 opinions
    By John Gelotti in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 13
    Last Post: 04-10-2011, 01:27 PM
  5. Anybody have an opinions on the new remington 1911 R1
    By Thumper in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 06-27-2010, 12:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts