according to this table...

[goo]

.30 Caliber (.30-06 Springfield) Ammunition
...
if you wanted to fabricate a rfle grenade round you pull the bullet on a standard round, pour out half the powder and crimp or otherwise seal the top like with wax. of course, this is posted for academic purposes only. old f*rts like me shouldn't be messing around with 50,000 psi.
...
http://farm3.static.flickr.com/2565/...0e3af969f6.jpg
...
http://farm4.static.flickr.com/3513/...d5fa7372e0.jpg

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[goo]

i'm thinking if one was to get a $100.00 barelled rcvr from the CMP i t would be okay to make a grenade launcher out of.

[Mark in Rochester]

GRENADE LAUNCHING CARTRIDGES AND DEVICES
A GRENADE LAUNCHING CARTRIDGE IS A CRIMPED HIGH POWERED BLANK THAT IS UTILIZED WITH A LAUNCHING ADAPTOR ON MILITARY WEAPONS TO FIRE ROCKETS AND GRENADES SUCH AS THE M31 SHAPED CHARGE MISSILE. THESE BLANKS ARE NOT TO BE USED WITH ANY TYPE OF BLANK ADAPTOR OR SUPPRESSOR.



HV-0548
.30-06 SPRINGFIELD
$13.95/PKG OF 10


more here: http://www.hi-vel.com/Catalog__21/Gr...ices___ca.html

[goo]

thanks, mark.
as i said, i would NEVER consider launching a grenade from a garand.

...

[gijunkman]

"This cartridge is loaded with approximately 5 grains of very fine black powder and 40 grains of smokless powder adjusted to give the M9A1 antitank grenade a velocity of 180 +/-15 feet per second at 5.5 feet. the complete cartridge weighs 246 grains and is 2.49 inches long. the case weighs 200 grains." TM9-1990 SMALL-ARMS AMMUNITION, War Department September 1947.

[gijunkman]

[TerryS]

You are missing this one.

[gijunkman]

I know where one is at a local gun shop, but it's part of his display and won't part with it. It's the only one of its type I've seen around here.

[goo]

as near as i can tell the 'plunger on the launcher doesn't push the poppet valve on the GCL screw down unless you push it down.
might need a special screw
any inputs?
thx,
goo

[goo]

will m1 grenades fit on a bm59?
....
http://farm4.static.flickr.com/3451/...c4cfb5f583.jpg