Target front sight for No4 MKII

[Calfed]

I'm looking for a front globe sight that fits a No4 MKII. Anyone be able to help me out and explain if any are available and if so, what is out there?

Thanks.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Peter Laidler]

|Globe or do you mean a ring sight? There are Parker Hale variants available but you'll need to alter the height of your foresight block

[muffett.2008]

Parker Hale made one called the Matchmaker, tunnel foresight with No.4 adapter that fitted in place of the original sight block. there was also an adapter plate that was in two halves and clamped in place of the original block, it also took the matchmaker tunnel.

[trooper554877]

Parker Hale made one called the Matchmaker, tunnel foresight with No.4 adapter that fitted in place of the original sight block. there was also an adapter plate that was in two halves and clamped in place of the original block, it also took the matchmaker tunnel.

jeez you keep popping up on my computer every time i have a look muff!!! Great minds think alike eh!
Should really do that book.
cheers again
Ned

[Calfed]

|Globe or do you mean a ring sight? There are Parker Hale variants available but you'll need to alter the height of your foresight block

Yes, I think you could also call it a ring sight.

I've got one for a Springfield '03 made by Redfield.


Was wondering if PH or BSA or some other manufacturer made them for the No4

I've already got a PH 5C and a 4/47 TZ for the rear

---------- Post added at 07:30 AM ---------- Previous post was at 07:27 AM ----------

Parker Hale made one called the Matchmaker, tunnel foresight with No.4 adapter that fitted in place of the original sight block. there was also an adapter plate that was in two halves and clamped in place of the original block, it also took the matchmaker tunnel.

Thanks, Muff...that sounds like what I'm after