-
Legacy Member
no4 7.62 stripper clip adapters
anyone know where to get these? were they reliable or am i better off just saving my money and not bothering
thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
04-02-2018 09:48 PM
# ADS
Friends and Sponsors
-
Legacy Member
Look on the shelf where the fairy dust is along side the chooks teeth leaning against the rocking horse poo. I wish you luck lots of luck.
-
-
-
Legacy Member

Originally Posted by
sparky12130
anyone know where to get these? were they reliable or am i better off just saving my money and not bothering
thanks
There're crap!
I used an L39A1 for service rifle competitions a few years back (with a No.4 rear sight) and assumed I could load fairly quickly with the adapter in the charger bridge.
Nothing could have been further from the truth, I ended up buying another couple of magazines and kept them charged in a 58 Pat ammo pouch for competitions.
-
-
Legacy Member
My own experience with them has been that they work well; there is a bit of a knack in making them fit into the 303 charger bridge. Also a modified technique when stripping the rounds into the magazine - as well as thumb pressure, I put my forefinger under the tip of the top round in the charger and this seems to keep everything square to feed in. Have used three types, the Enfield, Sterling and a very well done custom job which was made to replace the cross-piece in the existing charger bridge.
-
-
Legacy Member

Originally Posted by
Strangely Brown
There're crap!
I used an L39A1 for service rifle competitions a few years back (with a No.4 rear sight) and assumed I could load fairly quickly with the adapter in the charger bridge.
Nothing could have been further from the truth, I ended up buying another couple of magazines and kept them charged in a 58 Pat ammo pouch for competitions.
Bloody hell Mick, two spare 7.62 magazines, did you win the lottery!?
-
Thank You to David TS For This Useful Post:
-
Legacy Member

Originally Posted by
David TS
Bloody hell Mick, two spare 7.62 magazines, did you win the lottery!?

From memory David they were £35 & £40, I thought I was being ripped off even then!
A now departed friend remembers buying 5 new No.4 magazines from Ma Parkers nephew after he took over the business for £25.
-
-
Legacy Member
I saw a Stirling 7.62 mag for sale today Mick, it was around £180 
And new No 4 mags at £5 each - I'll take a crate
-
-
Legacy Member
The clip adapter that the OP mentions were classed as scrap about ten years ago, when I enquired about them a dealer gave me 5 or 6 which I have since given away.
Their ability to stay in the charger bridge was at the very least suspect, there may be one in the mud on Century range at Bisley because I can remember finishing a service rifle stage only to discover the one fitted had vanished!
-
-
Legacy Member
Apparently the little adapters were supposed to be rivetted in place, that is what the extra hole is for
-
-
Legacy Member

Originally Posted by
Maxwell Smart
Apparently the little adapters were supposed to be rivetted in place, that is what the extra hole is for
I didn't know that.
-