B-Square Scope Mount

**Aragorn243** · 05-18-2018 06:19 PM

I don't believe I ever shared this before today but as the topic came up on another thread, I uploaded the photos. I had this scope on the rifle for probably 10 years. It requires the removal of the ejector screw if I remember right and then is more or less clamped onto the rear charging bridge. It does not harm the rifle and was very stable in the time I had it on. I killed two deer with this setup on the first and only time I took it into the woods so it has a very good track record. I have since restored the rifle to military configuration but kept the scope and mount just in case I ever decide to take it hunting again.

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 05-18-2018 06:19 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**browningautorifle** · 05-18-2018 07:09 PM

Most guys that have them swear by them...others that don't call them down. The idea of being able to return a rifle to original makes it worth a try. After all, it's not meant as a replacement for regulated rifles...

**Aragorn243** · 05-18-2018 10:56 PM

I'm wondering if it will work on my Indian 308. Might have to investigate that. A bit cheaper to shoot than the 303.

**browningautorifle** · 05-19-2018 12:42 PM

I'll bet you get good satisfaction...

**Aragorn243** · 05-19-2018 05:03 PM

LOL, first I have to remember where I put the scope. Then I have to find the 308. Hoping it isn't buried in the back of the safe.

**newcastle** · 05-23-2018 11:41 AM

I have a B square mount for the #4 and its solid. Is there a model or part number for the mount that fits the No.1 Mk3 ?

**GS455** · 04-20-2019 11:40 AM

Originally Posted by newcastle

I have a B square mount for the #4 and its solid. Is there a model or part number for the mount that fits the No.1 Mk3 ?

Anybody find out about Mark 3 mounts for the Indian 308? I've looked all over the internet and it seems all their products are sold out on retailers sites. Can't even find a company website

**Brian Dick** · 04-20-2019 02:49 PM

The S&K for the Mk.III/III* is lacking and you have to remove wood from the forend to install it. I'm glad the B-Square at the very least works. It should work on a 2A/2A1 too.

PS, Your rear sight guard is on backwards.

---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------

The S&K for the Mk.III/III* is lacking and you have to remove wood from the forend to install it. I'm glad the B-Square at the very least works. It should work on a 2A/2A1 too.

PS, Your rear sight guard is on backwards.

Thread: B-Square Scope Mount

Thread Tools

Search Thread

Display

B-Square Scope Mount

Thank You to Aragorn243 For This Useful Post:

Thank You to Aragorn243 For This Useful Post:

Similar Threads

1 inch tubed scope for an Enfield scope mount

MAS 49/56 scope mount?

No8 square edged Tin and No32 scope

M84 Scope mount

Tags for this Thread

Posting Permissions