Transverse screw and nut, any solutions?

**jonh172** · 09-27-2020 01:32 PM

Has anyone found a decent alternative to the apparently unobtainable transverse screws and nuts?
Need 3 of them.

Jon

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 09-27-2020 01:32 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**Lee Enfield** · 09-27-2020 03:03 PM

For a no4mk2 stock?

**jonh172** · 09-27-2020 03:48 PM

Originally Posted by Lee Enfield

For a no4mk2 stock?

Oh shoot, yes!
Thanks!

**Parashooter** · 09-27-2020 05:14 PM

Not too tough to make a decent replica in home workshop. Just find screw and nut of approximate right size and grind nut and screw head to diameter that fits recesses in forestock. Cut slot with fine hacksaw, heat-blue where it shows, cobble up a spanner from sheet steel, and Bob's your uncle

.

**Mk VII** · 09-27-2020 05:21 PM

I've got a bunch of the screws here - not a dozen but not just one, either.

**jonh172** · 09-27-2020 05:46 PM

Originally Posted by Parashooter

Not too tough to make a decent replica in home workshop. Just find screw and nut of approximate right size and grind nut and screw head to diameter that fits recesses in forestock. Cut slot with fine hacksaw, heat-blue where it shows, cobble up a spanner from sheet steel, and Bob's your uncle

.

https://www.milsurps.com/attachment....02&cid=1&stc=1

Well Para, this is exactly the kind of reply I was looping for!
Thank your sir!
I’m off to the hardware store!!

Thread: Transverse screw and nut, any solutions?

Thread Tools

Search Thread

Display

Transverse screw and nut, any solutions?

Thank You to Parashooter For This Useful Post:

Similar Threads

DS Solutions leather slings?

1916 Aldis Scope - Focus Ring Screw & Elevation Dial Screw

No 4 Mk 2 Transverse Screw

The Llama 1911: Common Problems and Simple Solutions

Tactical Solutions dedicated 22LR M4 upper: any comments ??

Tags for this Thread

Posting Permissions