Garand action wrench question.

**ssgross** · 02-17-2022 06:18 PM

Hello, Does anyone have any of the Brownell's action wrenches, and would one of you mind measuring the distance between the bolts on center, and the bolt diameter? I have a wheeler wrench, and want to know if I can get away with purchasing only a Garand icon

head from Brownells and use it with the wheeler handle/base.

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 02-17-2022 06:18 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**browningautorifle** · 02-17-2022 09:12 PM

See PMs.

**Mark in Rochester** · 02-21-2022 10:50 AM

3.25 inches center to center bolts look to be .5 inches

**ssgross** · 02-21-2022 12:36 PM

Thanks.
For anyone that comes across this, the Wheeler is .5 bolts, but 3 inches on center.
I may just take Jim's suggestion and make my own out of a block of aluminum.

Thread: Garand action wrench question.

Thread Tools

Search Thread

Display

Garand action wrench question.

Thank You to Mark in Rochester For This Useful Post:

Thank You to ssgross For This Useful Post:

Similar Threads

K11 Rebarrel - Action Wrench?

1903A1 Action Wrench and Vise Jaw Special Drawings

1903 Springfield Action/Receiver Wrench Drawing

Brownells barrel clamp & action wrench - suitable for Enfields? Bushing fit?

Armourers No1 and No4 Action Wrench

Posting Permissions