• Blueprints for The STEN MKII (complete machine plans)

    Blueprints for The STEN MKII (complete machine plans)
    by Milsurps.Com member bigduke6

    Note: After you click on images to ENLARGE them, you may find they automatically size smaller in your browser's window making them harder to view. The auto sizing is your browser's way of keeping images entirely within the screen size you have set. Move your mouse pointer to the bottom centre of the pic and you will see an options panel appear. There will be a small square box next to the large X, which will have a pointer arrow sticking out of it. If it's illuminated, it means the pic you're viewing can be enlarged, so click on this box and the pic will EXPAND and open to its normal size. Low quality pics shown below are for illustrative purposes only and the quality of the images within the drawings of the PDF file download are much greater.

    (Click PIC to Enlarge)

    (Click PIC to Enlarge)

    The STEN MKII (complete machine plans)
    PDF file size = 1.37 Mb

    (Click PIC to read and save Adobe PDF File)
    (Right Click on PIC and choose "Save Target As..." to download PDF file)

    Note: Original complete set of blueprints provided courtesy of MILSURPS.COM member bigduke6 (click here).

    Copyright ©2006 - 2011 by bigduke6 and MILSURPS.COM

    Observations: by Badger

    The STEN MKII (complete machine plans)

    This article contains a complete set of plans for machining a STEN SUBMACHINE GUN, 9-millimetre submachine gun that became the standard such weapon in the British Commonwealth armed forces during World War II. Moreover, hundreds of thousands of Sten guns were provided to underground movements everywhere in Europe during that war. The gun was so ubiquitous that its name became all but a generic term for submachine gun. The Sten gun remained in service until the late 1950s.

    The most common version of the Sten gun was 30 inches (76.2 cm) long with a barrel of 7.5 inches (19 cm). It fired at a rate of 550 rounds per minute, and it had a 32-round box magazine that, however, tended to jam if more than 30 rounds were loaded. The butt was a steel frame that, with the barrel, could be removed without difficulty so that the disassembled weapon could be easily hidden. Its weight was just over six pounds (2.7 kg) unloaded.

    Collector's Comments and Feedback:

    1. Note: The opinions expressed herein or statements made in this article are solely those of the author, and do not necessarily reflect the views of the Military Surplus Collectors Forums, or the ownership and moderation group of this site. MILSURPS.COM accepts no legal liability or responsibility for any claims made or opinions expressed herein, nor is this article published to encourage anyone to build, modify or alter any device or firearm mentioned that would be in violation of any local, regional, or other country laws. Also, please note that neither the author nor MILSURPS.COM recommends that any member of these forums, or a reader of this article, try this type of experimentation without the proper knowledge, equipment and training. ...... (Feedback by "Badger")
    Comments 1 Comment
    1. Walther38's Avatar
      If you check carefully those plans you will find soon that except maybe some small parts the overall shape and view of this Sten is definitely different from a real STEN, e.g. the ROF (6) Sten beatifully presented on this forum and on my drawings.

      Warning: This is a relatively older thread
      This discussion is older than 360 days. Some information contained in it may no longer be current.
The SMLE 1903-1989