Forum for discussion about gunsmithing techniques and related issues in regards to military surplus firearms
Screeeech..... Aw Crap!! That's going to leave a mark!! Today Ken Brooks shows how non-marring tools can save you from embarrassment (and from a...
What to look for in a Bench Vise & their care. In this lesson Ken Brooks discusses the proper care and feeding of the bench vise and shares his...
What kind of Gun Oil Should You Use? Lubricants/Penetrants/Protectants. Join Ken Brooks as he discusses various lubricants, penetrants and...
Is your workshop a mess? Join Darrell Holland as he shows you time saving tips on how to organize your space. <iframe...
Spent the money to buy a newer rifle from Savage and now you want to get the most out of it? Darrell Holland's lesson on the ins and outs of the...
Today AGI president Gene Kelly takes you through various jaw attachments that allow your vise to grip a part without leaving marks on it. <iframe...
Just follow these tips from Ken Brooks on organizing your workbench and become more efficient. <iframe...
In today's lesson Ken Brooks shows you how using tweezers, forceps and specialized pliers can make your life easier and follows up with tips on...
How to see in the dark - Gunsmithing Inspection Lights Are you in the dark about firearm inspection lights? Join Ken Brooks as he demonstrates...
Are you getting rectangular holes instead of round holes in your target when at the range? Then this lesson on bullet stability and yaw, featuring...
Bob Dunlap teaches you about slide-under and snap-over extractors in this lesson. <iframe...
Don't throw away that broken or worn out punch! Master Gunsmith Ken Brooks shows you how to breath new life into that old punch! <iframe...
In this lesson, Ken Brooks talks about why triggers are heavy and hard to pull from the factory and how to responsibly perform a trigger job. ...
Do you know what to Look For when Buying a used Remington 700? Don't want to get burned? Master Riflesmith Darrell Holland takes you in-depth into...
How to organize your Vertical Mill along with Tips & Projects to get more out of your Milling Machine. Master Riflesmith Darrell Holland shows you...
How to Set Up Your Welding & Heat Treat Areas Need to weld or heat treat parts and don't want to get burned? Ken Brooks shows you how to properly...
Have a spring that's too stiff and needs to be lightened up? Join Ken Brooks as he shares the tips and techniques of lightening coil spring and avoid...
Want the maximum accuracy and performance from your rifle? Darrell Holland gives you detailed instruction of properly cleaning your rifle so you can...
Today, Ken Brooks discusses how to properly care for your files so you can get the most out of them. As a bonus, Ken also discusses many of the...
As you learned in the last lesson on Extractors, "Moment of Mass" can cause problems with your gun. In this lesson Bob Dunlap describes some of the...
Headspace, Part 1: What is it? How is it measured? In this lesson on headspace, Bob Dunlap discusses what it is, why it's important and shows you how...
In this mini lesson, Master Riflesmith Darrell Holland shares a wealth of information about working on Remington 700 rifles that will improve...
Glues & Epoxies for Gunsmithing In this lesson, Ken Brooks talks about glues and epoxies, including how to color match adhesives to the material...
Is your barrel ready to rattle right out of your gun? In this lesson Bob Dunlap and Ken Brooks explain loose breech, then show you how to check for...
Parts Cleaning and Organizing Spare Parts First Ken covers cleaning parts and then follows up with tip on how to keep your spare parts organized. ...
In a new series of lessons, Bob Dunlap takes up firing pin design and fit. As always Bob tells you the WHY not just the HOW. In this lesson he...
Are you an accuracy nut? Then you'll want to hear what Ken Brooks has to say in today's lesson on bedding rifles. <iframe...
Tapered vs Hollow Ground Screwdrivers? A screwdriver is a screwdriver, right? Not necessarily! Join us as Ken Brooks shows us the differences...
Today Ken Brooks shows you a specialized spring tool he made and tells you how use it and how to make one yourself. As a bonus, Ken also talks about...
Checking for proper Muzzle Brake Installation Not sure if your muzzle brake is affecting your accuracy? Ken Brooks shows you how to check whether...
How much spring tension does an extractor need to do it's job? You might be surprised!! In this lesson Bob Dunlap takes up the subject of spring...
Heating Parts Without Getting Burned With today's hot tip is Ken Brooks. Ken shows you how to properly heat parts without destroying the heat...
Your FINAL Extractor Lesson - Did You Pass? Your extractor is shaped and fitted well and has proper spring tension, yet you still have feeding...
Foredom Tool Tips Organizing Your Foredom/Dremel Tool Bits. In today's lesson Ken Brooks shows how easy it is to keep tool bits organized and how...
Test Firing After Making a Repair - "How & Why" You just finished a repair, now it's time to go to the range and test it! In this issue, Ken...
Part 1 - In this Classroom segment AGI Master Gunsmithing Instructor Bob Dunlap introduces you to the purpose and concepts of extractors and explains...
Making Safe Edge Files Do you often accidentally take metal off parts in areas that you never intended? In this lesson Ken Brooks shows you how to...
We have done the best we can to gather together volumes of Machinery’s Reference Series from the early 1900's. So far, we have located the PDF...
In this mini-lesson, Professional Gunsmith Ken Brooks discusses specialized screwdrivers for Gunsmithing and shows you how to modify an existing...
Repairing Loose Revolver Grips Tired of shooting your revolver and having it jump all over the place because the grips are loose? In this lesson...
The Modern Gunsmith by James Virgil Howe Format: Volume 1 - 393 pages/Volume 2 - 458 pages Published 1941 by Funk & Wagnalls, New York Note:...
How to fit an Extractor - Shaping and Contouring the Hook Have a gun with problems feeding or extracting? The shape of the extractor hook could...
Does the Left Hand (Extractor) Know what the Right Hand is Doing?! The Left Hand Extractor. Extractors come in both left and right hand...
Part 1 - Field Demonstration of what happens when your firearm has too much headspace. Ken Brooks and Bob Dunlap risk life and limb to take you to...
This post is a tutorial on some of the things you can do to maximize the inexpensive chinese import 7" swing lathes to turn the machines from barely...
Je vous présente en français une traduction intégrale du tutoriel de stencollector et de Claven2 sur la fabrication d'une SAS-3 Mk2. Versions...
Here in Canada, a semi-auto version of the STEN has finally been RCMP and CFC approved. To get one, you must build one as there is no commercial...
My apologies for the delay in giving everyone a thorough update, but I was up and down almost 36 hours addressing the outage, and I needed some...
The following tutorial was created for the benefit of our members by Milsurps Moderator Harlan (deceased). On behalf of all of our membership, I'd...
Hello folks … :) I'd like to remind everyone to re-read our Forum Rules & Site User Agreement (click here), particularly the section which covers...
Why have a separate Social Groups area? Over the last 10 years, we’ve received many requests to permit broader public discussions amongst members,...
There are some members who seem to experience site time-outs, or other problems when uploading pics as attachments to their threads and posts. It...
Other than someone who fails to say thank you when they get an answer to a question they’ve posted, I don’t think there’s anything more frustrating...
<center><img src="images/advisory_panel_reviewed_medium.png" alt="This item has been reviewed by members of the Milsurps Advisory Panel."><img...
Today’s Internet exposes computer users and the web sites they access, to a wide range of malicious pieces of infectious software code, designed to...
We understand you may be impatient to get on with placing your advertisement, but we would ask that you please read this post carefully, in order to...
Answer: For your own protection and to help preserve them for future research by all members ... :thup: The reason we capture and store all...
The following tutorial was created for the benefit of our members by Milsurps Moderator cafdfw (Harlan). On behalf of all of our membership, I'd...
The answer is YES … :beerchug: With the evolution of technology, many of our very active members want to keep current viewing our forums using...
A lot of members don't realize that our site supports multiple interfaces, often referred to as Forum Skins. Fundamentally, there are three...
has anyone made bayonet mount based adapters for surplus rifles?
So a while ago I picked up a 2A and I love the thing. But it really needed some love. I got a replacement stock for it, as the original was oil...
Any one know where I could get my hands on blueprints for the Receiver Barrel assembly fixture? I think the document number is 41-F-2987-250. Thanks...
How do you remove the Ross Rifle safety catch (the one that slides in and out)
Is the extractor collar on the Swedish M1896 Mauser interchangeable with the collar on the Spanish M1893 Mauser
Im not sure where the best place to put this. Has anyone here done restoration work on a dreyse or chassepot rifle? Since im a rather bored...
Does any one know where these nails can be purchased? Thanks Ed
I have a shot out barrel/ cut down berthier 1907/15. Looking for OAL full barrel length (Not Carbine length) and OD at the muzzle. I can...
I bought a nambu 94 and its in good shape,all but the safety it is loose and doesent engage any ideas whats wrong thanks
So a while ago I picked up an Ishapore 2A for about $350. I'm quite happy I did as they're much more now. It was newly-imported and unfired, it...
I have a Garand that needs serviced. I live in SoCal. Anyone know of a reputable smith?
Anyone run into the safety made by Walter Lodewick of Portland Oregon? I am wondering about fit, finish, and durability. I am thinking about a...
How do I remove the bolt takedown discs from my 98k laminated stock? I want to remove them, clean all the gunk from both the discs and the stock,...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules & Site User Agreement