I think it has more to do with two more powders IMR and H4895 that can be used with 2.50 dipper that comes with the Lee Loader. The H4895 loads for 150 grain bullets in Lees Modern Reloading are not...
Type: Posts; User: Mike 56; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
I think it has more to do with two more powders IMR and H4895 that can be used with 2.50 dipper that comes with the Lee Loader. The H4895 loads for 150 grain bullets in Lees Modern Reloading are not...
When i could not get 4064 i started using Reloader 15 i like it alot it has worked well for me.
Ken, I looked your load in my Lee Modern Reloading and Hornady manuals.
starting load max load
Lee Modern Reloading 46 grains...
I like Lee case lube i put it on with my fingers. I put it on a very small amount. I just drag the case mouth across my finger to lube the case neck. When i am done loading i remove the case lube...
Bolt action rifles don't need to be crimped some guys do crimp their cast loads lots of guys don't. If you are loading for a rifle with a tube magazine loads with cast or jacketed need to be crimped....
Try 8-9 gr unique. Frair the cases with a Lee flaring die before seating the bullets. Just crimp enough to remove the flair. Seat the bullet at least the dia of the bullet. If your bullets aren't...
I use the M95 dies to load Nagant gas seal brass. You just need to remove the decapping rod in the sizing die to size them. My barrel slugs .312 i an using 90gr .314 home cast bullets. To use .308...
Slug your barrel i think those bullets are to small for your rifle. You could try 11gr of 2400 for unchecked loads. Here is article with lots of info on cast bullets in milsurp rifles. Cast Bullet...
The Lee Nagant dies roll crimp. The funny Nagant crimps on the gas seal ammo straighten when you shoot them.
Those are 7.62x39 bullets. Hornady 123gr bullets shoot well in all three Mosin Nagants they slug .311-.3125. Try IMR 4064 or Reloader15. The Hornady manual has data for 123gr .310 bullets. My Nagants...
Imr 4064 has been my go to powder for long time. I have been loading 54R, 7.5x55 and 223. For a while i could not get 4064 i started using Reloader 15 i really like it. Imr 4198 was a big surprize it...
You will need to neck size and there will be times you will need to full length size i would buy a lee deluxe die set it comes with both as well as a seating die. They sell for 30.00 on line. You...
If the arbor moves at all you should not shoot it.
If arbor is loose don't shoot it. It is repairable but it is tough job. When i was reading your post and you were writing about the wedge fit i thought the arbor might loose. Your cylinder gap is...
delete
I think with a target like that you could post it any where you want. Nice shooting and rifle. I have never heard of 10.75x58r very cool.
I am just starting to load 303 but have been loading fat 30s in Mosin Nagants for years. What i have learned might apply to 303. I have three Moslin Nagants that shoot .308 bullets well. Two of the...
Polish the barrel with a new bore snake and Turtle Wax chrome polish. I just polished a two grove #4 barrell looks like new. How clean is clean enough? I say shoot it if it wont shoot jacketed...
Thats fine if anyone asks me where i learned it i will tell them that i got it from WarPig . :thup:
I am just finishing up servicing my #4 mk1 Enfield i bought ten years ago and put it in my safe to work on one day. When i took it out of the safe the action was loose. I used Awesome all purpose...
Everyone knows that you can use a MN bolt tool as screw driver and a firing pin gauge but did you know it is also a 91/30 bayonet wrench.
...
When i get a new surplus rifle i clean the barrel with hot water then with solvent. I finish up using a new bore snake and turtle wax chrome polish. I put a teaspoon of polish in the chamber and...
It would not surprise me if the Soviets played around with converting Nagants to 7.62 Tok ammo. I have herd about Nagant cylinders being converted as well after market cylinders in 32ACP, 7.62 Tok,...
I don't think shooting 7.62 ammo in a Nagant would be safe but if you loaded 7.62 cases with H&R mag starting loads or cast bullets Trail Boss it might be a fun shooter.
I have shot 32 H&R and 32 S&W longs in my M95 the S&W longs shot fine the H&R mags were to hot for my Nagant. The cases split on both.
I reload 32-20 Starline brass using Lee M95 dies and a M1...