i wouldn't change any part if the stock is a repo.
Type: Posts; User: jim r; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
i wouldn't change any part if the stock is a repo.
THIS IS GOOD INFO HERE, but sloppy primer seating will cause a slam fire
https://www.milsurps.com/images/imported/2009/07/412570-1.jpg
i did this to mine , works great
i've use every brand of primer avaliable in the 30 carbine without any slamfires. the only way you might get a slamfire is to drop the round in the chamber an let the bolt slam home on it an even...
the 1in 9 twist is great with the hornady 55gr. fmjbt bullet. 4895 would work ok with this round. i use wc846 with great results, my friend uses varget with great results. i'v tried the 69gr. sierras...
dosen't the carbine round headspace off the case mouth?
i've been using wc846 in my ar's for years now, no it is not a dirty burning powder, in fact one of the most accurate of all powders i've used incluning varget. the military used because they were...
i have the same set up on a bushmaster lower .awsome with sierra 69gr., ave. 3/4 to 1 in.at 200yds. almost 1 hole at 100yds. using wc846 powder. bought 16 lbs. two years ago from pat's reloading on a...
i read a while back that their barrel was one of the best, a lot of bashing gets started because someone had a problem ( more then likley their fault) but they wouldn't admit it. heck i see more...
just wondering would a 45 long colt round work in it?
100 times ? i wouldn't think a primer would be able stay in.
i don't think you are going to be confinced one way or another. it realy dosen't make sense to read a differant barrel manfactures procedure for barrel break in unless you are using there barrel....
i've reload a lot for the garand and never had a bullet come lose, just my 02cents,jim
hi all ,this is jim from e ohio,i wish the best for this forum.:beerchug: