I shoot a mod 70 international with aperture front and rear sights with my 68 year old eyes , have great accuracy...Anyone make a screw in front post for an ar15 that would replace the front...
Type: Posts; User: c east; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
I shoot a mod 70 international with aperture front and rear sights with my 68 year old eyes , have great accuracy...Anyone make a screw in front post for an ar15 that would replace the front...
Anyone know how high to sight in at 25 meters to be right on at 100....200 ....300 So on..In Basic with an m14 it was about 2.5" high...Memory fails me (1966) Basic.Charlie
need the pin that holds the trigger group on the receiver...Charlie
Yes with a burris fast fire....It cannot be beat...The # 2 model is a hard battery change, but the 3 model is hard to turn on or off...I have both and the lithium bat and the # 2 switch is better......
LC 7.62 NM brass
About 15 years ago I got this once fired brass from Jeff Bartlet...It has been sized and trimmed to length...Not tarnished but has some spots every 10th shell...I want to sell it,...
Just got back from an old Gunsmith that eats and breaths 45 auto..Fixed 4 problems and put in a buffer free...I have fired 50 rounds thru it and it shows a slight indentation .
Any...
Please recommend 1911 mags and best place to buy...Charlie
Thank you sir that is it....Charlie
Woops didn't look....It is extended not G.I. issue...Charlie
Where to buy one?...Charlie
What about here? Are they really G.I.
Slide Stop, .45 ACP, Extended, Replacement, Checkered Blued Gun Parts | 261550C | Numrich Gun Parts
A friend of mine has put 5,000 rds of hardball reloads and has only replaced the barrel and recoil spring...What about you people?.....Charlie
I have a 1911 that sometimes will not hold the slide open after the last round... Put the same mags in a friends 1911 and they all worked no problem....I have a Ruger coming so I want to swap some...
Will the parts for a govt. 1911 and a Ruger 1911 interchange? Charlie
Need a good 1911.......copy ....Argentine or ruger...Just want it to work like my other G.I. 1911....Charlie
Yea I sold 7 bricks in 7 minutes...$40 per...Charlie
A fellow had a spam can 6oo rounds for $800 ...I passed and offered to sell all mine for $1 he declined..Charlie
It is 74 LC ( I think....It's been a week) I found it about a week ago and a guy at the gun show offered me $40 a box...They are 50 round boxes...Is that a good price now days?...Charlie
I push the copper plated slugs to full speed with 15 grains of 4227...same results as copper jackets rounds for everything...accuracy and fouling....Charlie
I have about 10 of the korean mags and they run 100% in one of my carbine...All of my 15 rd mags were new in wrap...GI....I won't play with ramp,,,Send it to some garu,,,,Have cleaned bolt tried new...
Ok I have a carbine that fails to feed from the right side of the mag on a 30 rd mag about half the time on a 15 rd mag with soft point ammo....Yes they are reloads....(15 grains of 4227 110 grain...
I have a question into ozark surplus If ( can request a type 3 they seem to have many but say most are type 2 or 3 which sounds iffy....I put that rifle in another stock and all problems went...
My receiver will slide back and forth almost 1/8" gap when forward....Where to start?....Charlie
Every time I sell something on the internet I'm sorry.....I like ANYONE that likes guns ...Something in common, but there are some LULU's out there...I have found some more rockola mags in the...
Yep that is it exactly...I guess I'm out $99 bucks...Charlie
Great I just got a 10 1/4" from northridge....I can't wait for comments here.....Charlie