Search:

I took that locking screw out and it looks like I do have the left hand 3 t.p.i. barrel because I could only see the end of one thread when I looked in the hole. I took some pictures of the whole...

I took the stock off and tried taking some pictures, but my camera isn't the best.

1. On the left side of the barrel there's the number 6233 that's just visible above the stock when it's on.

2....

Well luckily I don't think I need to worry. I took it out and held the gun at arms length wearing a heavy welding glove, just to be safe, and took a shot. The case looked fine so I shouldered it and...

Ok I'll try checking it like that, I was always checking with a fully assembled bolt. But if the headspace is bad couldn't a gunsmith just redrill the chamber then thread the barrel in another turn...

One more thing I'm wondering is, what's the procedure for checking the headspace with a straight pull rifle like this? I know on regular bolt actions it's pretty simple, if the bolt handle doesn't go...

Ok I'll probably give them a call tomorrow, thanks for the help.

Oh ok, so it might not be that far out of headspace because my no-go gauge is only .067. So how should I go about getting the headspace? Is there somewhere I can get the MoD spec no-go gauge? or...

I have a 1905 Ross sporting rifle in .303 that I got when my grandpa passed away. When I got the rifle it had been sitting in a gun cabinet without a bolt for at least 40 years, but I eventually...

That's good because that's what I'm planning on shooting the most, seeing how it's about half price of any other brand that I've seen.

Ok so that makes sense. I'll probably just keep the sight on the 200 meter slot until I can start reloading or get some faster ammo. How's that Prvi Partizan ammo?

Yeah my sight looks just like that, but it looks like the set screw is just to keep the slider from coming off when you slide it back, I'll take a closer look at it. And I would think the bullets I...

I'm going to, I don't have the dies yet.

I know the disc thing is probably wrong because the bore doesn't look as bad as it says it should, but the hold over seems right, probably just a coincidence. I am gonna wait and get some decent ammo...

I also just measured the sight blade and it is 7.5 mm so I need one that's a little shorter. Then I looked on numrich and there are a bunch of sights but there are a few for every height and they are...

I just got a m38 and it shoots low, about 3"-4" at around 100 yards. On the badge on the stock that tells the condition of the bore it has one part that says: Overslag 1 Str, which I believe means...

Oh, I just said it was Yugoslavian because on the box it says that's where the ammo was made and the box is pretty beat up so I figured it was old. I just shot it some more today and it seems like...

Ok, I just wanted to make sure because the guy I got it from said he never shot it. It's probably just because it's some old Yugoslavian ammo.

I got some better pictures. And I measured my firing pin protrusion, it's about 0.050" is that about what it should be?

haha yeah I know they're bad my phone's camera sucks, I'll try taking some better ones tomorrow.

I just got a 1941 Husquvarna M38 6.5 x 55 today and I took a few shots with it. I looked at a few of the fired cases and I think the primers have flattened out a little. I tried taking pictures...

I'm going to try and just replace it with another pin first. If the one I ordered doesn't fit I'll try and fix this one. I'm pretty sure the reason it broke is because I dry fired the gun a few times...

My firing pin is the pin on type and it looks like the one in this article about the mk3 bolt disassembly, Ross M-10 Rifle Bolt Disassembly, that's why I figured I'd ask.

I just got a bolt for my 1905 mk2 ross sporter and somehow I managed to snap the end of the firing pin off. I was just wondering if the 1910 mk3 firing pin would fit, because in all the pictures I've...