Someone cut mine off just past the ft. band -rounded the tip:yikes::mad: off then ground off the bayonet lug.
Type: Posts; User: krag99; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
Someone cut mine off just past the ft. band -rounded the tip:yikes::mad: off then ground off the bayonet lug.
The 40X is based on the Rem 722 action- The 40XB is based on the Mod 700 short action.
I've used gasoline and laquer thinner - all flammable be careful- if you are around a welding supply there is a crack detection kit that will show cracks/flawscomes in three parts -cleaner -...
what model weaver 330- c=click or s -silent - reticule type - post- x hairs??
How about a photo??
Looks like a late model - check the trigger-If it has two screws in front and one in the rear a Mod 700 safety should work I think some of the later models used castings/ powdered metal parts and can...
several years back the cmp sold a bunch of 513 parts so there should be lots of bolts out there -seems like they were $5.00 each- limit of 5 might check Lee's gun parts 0r Bob's Lots of those cmp...
I have a late norwegian krag that some one cut the stock off just past the ft band . has any one seen any wood for one of thse??
You didn't get the oiler? too bad !! Wow- Did You get a deal!
The original will be hard soldered ( silver)and will have a very slight dove tail you will have to get it red I would recommend using something to protect the bore from scaling (heat control...
There has been a little blow up with the vfw in texas they were sent a letter from the army that wanted an inventory of all stores LOANED( rifles ,tanks, cannons) and warning of possible...
Or tied them to a saddle scabbard
Some of those Older decoys are very valuable if they are wooden and hand made -do a little search first looks like a Ebay item to me
About 10-12years ago I used to buy demilled stuff from a place in Illinois they sold by the pound you specify what type of parts- rifle-pistol misc you wanted -It was like 10 lbs for $5.00 I bought...
Just don't be tempted to drill and tap the reciever you will lower the value
Smallbore shooting-22"s the NRA has had an iron- scope /any sight catagories for a long time
Big Larry I hope I sent you a PM or I:yikes: tried anyway
Read in one of Elmer Keiths books he talked about when he worked at ogden he said they had rebarreled many low# and he had shot them w/ proof loads his opinion was that if it had a late bolt in it it...
Anybody else seen the imports that had the importers stamp on the barrels roll stamped so hard/ poorly done that the barrel actually bent?? you could see the bend- we blacksmithed the barrel on...
I have heard that the academys did have some target scopes for the use of their rifle teams- these will have inventory numbers etched on them- I have a lyman super spot that is and supposedly came...
An international sold on ebay last week=$330.+
The garand was designed to work at a certain pressure curve level with mil spec ammo the improved might not have the same as ball ammo does there might be feeding problems
Hi new member here I have always been interested in older military rifles