Hi every one,
Hope everything going well for all of you, just want to give an update on the Bren. It’s been awhile since my last range time due to get the kids out to the beach and work around the...
Type: Posts; User: locchau; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)
Hi every one,
Hope everything going well for all of you, just want to give an update on the Bren. It’s been awhile since my last range time due to get the kids out to the beach and work around the...
Hi all,
Thank you all. Just finish polished both chamber last night, will try to work on the ZB mag tonight. Thank you Joe for the mag disassembles instruction. Vincent, I have noted that the...
Vincent,
I have no luck with the ZB39 mag that I got. Its either not load the first round or only load and shoot the first one, two round at most then the bullet tip down into the mag. I oil the...
Joe,
Thank you for your quick responded. Yes the wolf ammo that I used is steel case and none corrosive commercial ammo. I will order some ammo as your suggested and try them out this weekend,...
Joe,
Thank you for your replied. To make thing clear both barrel and gas regulator were unmodified when I get the rifle, then I drilled the barrel hole and gas regulator per your trial information...
Browningautorifle,
Thank you for your replied. Is that mean that I have a bad barrel?
Thank you
Hi all,
Just to give you all an update. Have the gas regulate and barrel hole drill per Joe information on both 7.62x54r and .303 barrels, and replace the recoil spring to the double mk2 spring...
Joe,
I did the test, the bolt and carrier slide in/out and locking as it should. I try uploading a video that I recorded but no luck, maybe the file too large. I am now trying to get some drill...
Joe, Wally and Peter,
From my machinist friend, the problem is from the tube and not by much. Drilling the Regulator port may fix it. I attached 3 pictures; one with my finger pointing is where...
Scoobsean,
I’ll take your advised and leave the striker spring alone. Right now I just concentrate on fixing the binding problem, and finding way to drill the gas regulator hole. Look like there...
Joe,
I meant striker spring and not recoil spring, words seem leaving after few beers. The little binding as I mention on last thread, turn out much worse than I thought it was. After let my...
Again, thank you all for all of the help and in formations that you all provided. I just took some pictures of the bolt face and inside of the receiver. I have removed the striker spring and with...
Scoobsean, I will take the pictures you asked this afternoon when I get off from work and maybe some pictures inside too if I can. WallyG, all I’ve got from the seller is that he bought the semi kit...
Thank you all. Scoobsean, both of my barrels regulators set to max no4. Striker spring insert all the way into socket and look good. Mr E, you are correct. The receiver have BREN MK II mark and...
Thank you both Vincent and Peter Laidler sir, will do as you both advised. The reason that I did not call Mr. Savage is that I have called him last April when I get the gun for a spare firing pin...
Hi all,
Please forgive me if this is an old thread or have already been answer. I got a semi auto Bren from a guy on Gun Broker in April 2016 with 2 barrels, one in original .303 and the other in...
Hello everyone,
My name is Loc Chau from Frederick Maryland. It is great to be member of Milsurps community, I am please to know all of you and proud to be a member of this site.
Best Regards...