Lithgow SMLE Failed Field Headspace Gauge

[rgamba]

So, I just get this all matching 1918 Lithgow N01 Mk3 and I'm going through the process of cleaning it up. By the looks of it, this rifle has not been fired in many years. Well, in my cleaning/inspection process prior to test firing I always check the headspace with my Forster .303 British Field Gauge (yup, removed the extractor and firing pin before checking). I was not happy to see the bolt close nicely on my field gauge. My question, for anyone that can help, what do I do next - should I track down a go and a no-go gauge?

Best

Robert

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

If you failed the field gauge you're already past the no-go gauge. Wide open. From here you will have to headspace with a new bolt head and proper gauges.

[Peter Laidler]

Robert, I suggest that you call up all there is on CHS on this forum and read it all twice. The next thing is to forget your 'field gauge' whatever a Foster field gauge is and beg, steal or borrow a set of correct gauges. The bolt should close on a .064" and NOT close over a .074" gauge. THat's really all there is to know.

We don't do gauges that show '....it's nearly ready to go' or '........it'll be nearly ready to not go soon'. It's In spec or it ain't! Give your mickey mouse gauge to someone you don't like as a fishing weight and get a set of the real things

[rgamba]

Thanks Jim and Peter for your help. Any suggestions on where I might find a replacement bolt head and proper gauges.

[bigduke6]

Give Brian Dick (BDL) a try, he should be able to sort you out.

[rgamba]

Good point Bigduke - should have thought of that myself - I've dealt with Brian before and he's great to deal with. Will shoot him an email.

Thanks guys

Robert

[rgamba]

Just checked and the Forster Field gauge I used is 0.70 - so, as Peter suggested, I need to get better gauges before I start swapping bolt heads. Have emailed Brian Dick at BDL - hopefully he has an 0.74 gauge.

Best

Robert

[3mctoledo]

Robert,
You out bid me on gunbroker. The only real concern, I had, is the barrel has a "R" on the knox. That means the barrel may have some rust. Make sure it is sound before shooting. Hope you enjoy it. It is a very nice piece.
Keith

[RJW NZ]

Robert,
You out bid me on gunbroker. The only real concern, I had, is the barrel has a "R" on the knox. That means the barrel may have some rust. Make sure it is sound before shooting. Hope you enjoy it. It is a very nice piece.
Keith

I have a 1918 Lithgow with that nice curly 'R' on the knox form, the barrel is spotless and shiny, so I don't know where the rust was. I suspect it was imaginary rust so as to qualify the unit for the next upgraded rifle faster after the no1 mk3's were done with.
Just my twp pennies worth.

[Peter Laidler]

Maybe RGAMBA's experience with his 'field gauge' .........whatever a field gauge is, could be a lesson for all......... We know that this particular field gauge rim thickness is a meaningless .070" so if you have one, and your bolt closes on it, then the CHS is good. If it doesn't close on it, it's STILL good.
Get rid of these mickey mouse meaningless gauges