My M1 Carbines.

[theholeinthedonut]

A Grand Rapid Plant Saginaw Stearing Gear.

Most parts seem to be matching, with the exception of the stock and the handguard, they're from an Underwood. But the rest seems to be ok.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[shadycon]

Nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[browningautorifle]

Nice, love the figure in the wood too...

[painter777]

Nice, love the figure in the wood too...

+1
Would love to see that stock right after being freshly oiled.

[USGI]

I like it, too! Is your push safety marked or plain? - Bob

[theholeinthedonut]

An all original parts early Winchester M1 Carbine. The stock is an I-cut that was changed into a low wood, it's strange but the only markings I found on the wood is a "W" in the well for the sling. Maybe the inspectors mark and the eskutcheon have been worn off.

[jond41403]

Forgive my ignorance,but shouldn't your Winchester have one more number in the serial?I also have a somewhat early Winchester (type 1 receiver,spring tube) and my serial is 1176194. I thought Winchester serials started at 1 million besides the 6-10 they were first assigned

[JimF4M1s (Deceased)]

Forgive my ignorance,but shouldn't your Winchester have one more number in the serial?I also have a somewhat early Winchester (type 1 receiver,spring tube) and my serial is 1176194. I thought Winchester serials started at 1 million besides the 6-10 they were first assigned

Maybe a bad angle for the photo missing the last digit on the right???

[jond41403]

Maybe a bad angle for the photo missing the last digit on the right???

Hey Jim,long time no see lol.i hope you are doing well. I bet it is a play on the light in the picture. I only noticed it because I noticed his serial number was fairly close to mine but it was only missing one digit it appeared.btw,I have been thoroughly enjoying the SEY 30 rnders

[JimF4M1s (Deceased)]

Hey Jim,long time no see lol.i hope you are doing well. I bet it is a play on the light in the picture. I only noticed it because I noticed his serial number was fairly close to mine but it was only missing one digit it appeared.btw,I have been thoroughly enjoying the SEY 30 rnders

They have worked the best for me over the years. Pleased they are doing the same for you.