The first Jig is for repairing/re riveting the locking spring thing on the Australianicon F1 BFA. In which I just happened to have one of the repaired BFA's in the collection and as you can see fits it perfectly. A BFA with good rivets won't fit onto the jig.

---------- Post added at 04:17 PM ---------- Previous post was at 04:13 PM ----------

The second one is as mentioned used for re-riveting the grips on a L1A1, L1A2, L1A3, L1A4, C1 Bayonets The plan for these is shown in the EMER's. I have a number of different variants of these, this one has been made using a cut in half I-beam as the base. Others I've seen are 2-piece welded together bases. Unfortunitly it didn't come with the corresponding punch.

---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------

Something new.

Its about 5 inches long



---------- Post added at 04:21 PM ---------- Previous post was at 04:20 PM ----------

Hummmm I wonder what this is?