-
FREE MEMBER
NO Posting or PM's Allowed
Johnny Cash Garand ?
What I thought was a legit rebuild now has me guessing? I have a 1941 S.A. garand I thought was simply re-barreled in 1946. Every part on the gun is S.A. but the only thing left from 1941 is the reciever. However all the parts are possibly 1946 & older. Would a re-build tear it down to the reciever & replace every single part? The stock also is a S.A. rework with denmark markings. Any input to make me feel good about this would be appreciated.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
01-24-2010 04:46 PM
# ADS
Friends and Sponsors
-
Any pics? 
Regards,
Badger
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
Tom...
About rebuilds, and specifically your question:

Originally Posted by
tom123
What I thought was a legit rebuild now has me guessing? I have a 1941 S.A. garand I thought was simply re-barreled in 1946. Every part on the gun is S.A. but the only thing left from 1941 is the reciever. However all the parts are possibly 1946 & older. Would a re-build tear it down to the reciever & replace every single part? The stock also is a S.A. rework with denmark markings. Any input to make me feel good about this would be appreciated.
...Yes. To the best of my knowledge, rebuilds were for the purpose of returning rifles to "as new" condition. The only way to ensure this was to strip 'em to component parts, measure/guage each and every part, then reassemble.
BTW, this is why so many M1s are "mixmasters." No rebuild facility paid the slightest attention to the original producer: the attitude was that "parts is parts."
Dunno about the stock. There again, if it was serviceable, I'd think it'd be reused. Restamped/recartouched, perhaps, but you'd best ask one of the stock experts -- which I assuredly am not.
HTH
Ben Hartley
Last edited by Ben Hartley; 01-24-2010 at 06:37 PM.
Reason: clarification
-
Legacy Member
I'm no expert but, any '41 would surely have seen plenty, having numerous parts replaced during the course of the war. After the war was over she probably looked a bit rough. Arsenal guy says "Hmmm, lets start from the beginning." Does this sound logical? Just me guessin'.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Johnny Cash? How does he fit in?
-
Legacy Member
From the song, I got it "One Piece At A Time".....Frank
-
Thank You to frankderrico For This Useful Post:
-
Legacy Member
Your rifle is likely a Fabrique Nationale rebuild. After WWII, the US contracted with FN in Herstal, Belgium
, to rebuild several hundred thousand rifles, probably all those that ended up in Europe. The contract ran from 1946-1949.
ALL rifles were completely stripped. Parts were inspected, & those serviceable were put in huge bins. Starting with the bare receiver, rifles were rebuilt with a combination of used parts & new parts from SA. For obvious reasons, a LOT of wood had to be replaced.
Your rifle made a subsequent trip to Denmark
, then came back to CMP
as a "Danish return".
There's no way to definitively identify an FN rebuild, definitely no stamp on the stock other than a proof P. Identification is done by the detective work you have done: a WW2 receiver with post-war parts, none later than 1949.
Last edited by Neal Myers; 01-27-2010 at 08:27 AM.
-
-
Legacy Member
FN rebuild of M1 rifles
Were there any rebuild markings/cartouches to indicate the FN rebuild ?
-
-
FREE MEMBER
NO Posting or PM's Allowed
I'm not sure what to look for to verify any kind of FN rebuild?
-
FREE MEMBER
NO Posting or PM's Allowed