-
FREE MEMBER
NO Posting or PM's Allowed
scope mount for sweedish mauser?
im possibly getting a sweedish mauser soon, was wondering if theres a no gunsmith mount that wouldnt permanently alter the rifle? My primary reason is collectability but if i can mount a scout scope or something i may just bring it hunting
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
05-29-2013 12:49 AM
# ADS
Friends and Sponsors
-
-
-
-
Horrible mounts in my and others' experience. B-Square usually makes the rifle seemingly less accurate. Patrick Chadwick is the only person I know to ever positively comment on those mounts. I have had such a mount on a very accurate Swede that I knew beforehand shot very well, as I purchased it from a friend, but t would not group at all using the scope. (Not my installation, but my friend's who got frustrated after adding the scope...) Had seen similar problems on a multitude of rifles. Mausers of various sorts, handgun, even an SVT40.
Alternatives? Dunno. S&K, maybe? The only rear sight replacing mount I have currently is one I cobbled up, but it added a dowel pin through the sight base:
The rail is screwed onto a hunk of 7075-T651 which was fit carefully into the recess. (Light press fit as installed.)
-
Thank You to jmoore For This Useful Post:
-
Advisory Panel
Well JM, I do confess that you typically have to wedge the thing between the sides of the backsight ramp, with a slip of copper or brass shim, otherwise it tends to rock on the very short pin axis. But for the terrible 98-family open-V sights, it is still better than my eyeballs. In the case of the Swedish Mauser, which has a much better backsight leaf and blade then a K98, I agree with you.
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
Originally Posted by
jmoore
which was fit carefully into the recess. (Light press fit as installed.)
That is where the B-Square fails, and why one needs a shim.
-
-
Contributing Member
I have a B-square mount for a No1 MKIII Enfield and it works fine. I had it on for years and shot two deer with it but took it off recently to restore it to military standard. It is not a scout mount however. It's a side mount that permanently attaches via the extraction screw and then clamps to the charging bridge. I had strong doubts about it as it seems rather awkward and easily whacked but it held up well for what I used it for. Guys at the range loved it.
-
-
Below is a link to an old thread I posted some time back, may be of use etc regarding Mauser mounts for long eye relief scopes, regarding the scopes can anyone sugest any?
Scope mounts
-
Thank You to bigduke6 For This Useful Post:
-
Originally Posted by
bigduke6
Below is a link to an old thread I posted some time back, may be of use etc regarding Mauser mounts for long eye relief scopes, regarding the scopes can anyone sugest any?
That fellow sure made a nice looking mount! As for scopes, my favorite long eye relief scope is the Weaver. I like them better than Leupold or Burris. Leupolds tend to require the scope further forward than is practical/comfortable due to a very long eye relief. Burris is good when they're good. But that seems hit or miss.
Nikons have too much edge distortion.
As for intermediate eye relief scopes- not much experience there.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Have S&K on a Yugo that replaces rear sight. Works fine
-
FREE MEMBER
NO Posting or PM's Allowed
emailed brass stacker, they said there trying to get one out in the fall.